Welcome to Tesla Motors Club
Discuss Tesla's Model S, Model 3, Model X, Model Y, Cybertruck, Roadster and More.
Register

Carbon fiber front, rear diffusor and rocker panel pics.

This site may earn commission on affiliate links.
825D80CE-B743-409E-A44D-7A04BB87484D.jpeg
08A5C67C-1326-4AD1-A18A-633D4D29D14D.jpeg
D5C732EA-744F-4E36-996B-8164B5B66619.jpeg
8AB7CFCA-7CD5-4EE2-B721-34A3751AE13B.jpeg
82EF7774-FF84-4B05-93A5-369197C7C339.jpeg
I just installed these on my model X. What do you guys think?
 
57220A94-410E-418D-8FF0-2EAB35F53A41.jpeg
A8E04D28-856B-4348-9F24-F4C84EFBEC67.jpeg
28896222-EE7D-4067-9997-2EBE58960A1A.jpeg
The installation was a little challenging. I did it myself. I think with a bubbly it would have been a lot easier. I used double sticky 3m tape and silicone. One spot stat would not stay down I had to use contact cement. The side skirts and the front were simple. The rear was the most challenging. I taped off the paint areas so not to scratch them and then I used rope to hold with wood blocks to push in on the areas that would not set flat.
 
  • Like
Reactions: P85_DA and Bogobec