Model 3 - Konig 20x8.5 Ampliforms with PS4S

[Devin94539]

Selling this set to make room for new wheels. Wheels are in great condition, no curb rash, only a few nicks as shown in pictures.

They are Dark Metalic Graphite in 20x8.5, 5x114.3, 30 mm offset and are coming of my model 3 performance. Will be sold with PS4S tires that are in good condition with even wear (6/32 to 7/32) left on all tires, no bumps or bruises.

Wheels/tires may have about 7-8k miles on them.

Will be sold with wheels, tires, tpms sensors (not new Bluetooth sensors). Black wheel nuts/locks sold for additional $50 if needed.

Asking $1,700 (wheels, tires and sensors) - looking for quick sale to make room for new shoes!

Note - These Konigs run about $1500, plus $125 for sensors, PS4S run about $1300 out the door. This set has at least 50% thread life remsiming.

 

[Devin94539]

Sale Pending (deposit received).

 

[Devin94539]

Bump, these are available again. Turns out buyer has a 2021, these wheels have the older sensor and will not work with the 2021 models that use the newer Bluetooth sensors. These wheels will work on all Model 3 variants from 2017 -2020.

Wheels were just removed today.
Price lowered to $1650 with sensors and locking lug nuts.

 

[Devin94539]

all washed and ready.

 

[marmaladedad]

Tempting…

In what part of SF Bay are you?

Also, the first few pictures in your original post, is your M3 already lowered? Or is that the stock height? Just gauging how it might look on mine (stock P suspension).

 

[Boourns]

Bump, these are available again. Turns out buyer has a 2021, these wheels have the older sensor and will not work with the 2021 models that use the newer Bluetooth sensors. These wheels will work on all Model 3 variants from 2017 -2020.

Wheels were just removed today.
Price lowered to $1650 with sensors and locking lug nuts.

You can’t just swap in the Bluetooth sensors and use them?

 

[Devin94539]

Tempting…

In what part of SF Bay are you?

Also, the first few pictures in your original post, is your M3 already lowered? Or is that the stock height? Just gauging how it might look on mine (stock P suspension).

here is picture before car was lowered.

 

[Devin94539]

You can’t just swap in the Bluetooth sensors and use them?

i think you could, buyer apparently didn't want to swap sensors, or didnt want to buy new ones.

 

[Sasmf]

here is picture before car was lowered. View attachment 733054

What model Konig wheel is that on the back wall? Are those for sale?

 

[Ryan Autry]

Available?

 

[Guardian]

i think you could, buyer apparently didn't want to swap sensors, or didnt want to buy new ones.

Are these still available?