Preventing Hansshow 9” Display & similar products from bouncing & making noise

[ElectricAnt54]

perhaps I did not install my unit well but when I go over moderate bumps the display can be seen vibrating up & down. If the bump is jarring enough, display will produce a sound as it hits the tesla dash. For a long time i wedged a pink school eraser under the unit. This lasted about 3 months but eventually the eraser kept falling out.
Now I am using soft foam earplugs on each side of the display to act as a shock absorber. myself nor passengers can see the earplugs but eventually I’d like to find white.

 

[labmixz]

While, I don't own any of the Hansshow displays, I would think using some neoprene foam strips should do the trick. Though I would definitely measure how much of a thickness you need. There's a wide variety of thicknesses on Amazon (here's an example, https://a.co/6MkwYo0), I've used neoprene in the past for other things (such as license plate rattling due to bass, etc).

Also, they have it in white as well (example: https://a.co/8Ra6uec) just make sure you get the right thickness

 

[carlos31820]

Check your installation. This is from the installation manual for the 9 inch screen.