You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
Tesla's Supercharger Team was recently laid off. We discuss what this means for the company on today's TMC Podcast streaming live at 1PM PDT. You can watch on X or on YouTube where you can participate in the live chat.
The Waco (Texas) SC has about 12 pedestals but they are not numbered in pairs like most. Instead they are grouped in fours (1A-2A-3A-4A-1B-2B-3B-4B-etc). Does the every-other-slot protocol still apply for minimizing slowdowns?
At Waco, it gets a little more complex.
If you check Supercharge.info and the forum for that site, It appears that there is a mix of 10 ea V2 150kW and 12 ea V3 250kW stalls.
The V3 250kW do not load share with the A/B stall like the V2 150kW stalls do, so the numbering on those is of no significance. You can recognize the V2 chargers because they have a thinner cable. Yes, this seems counterintuitive, but the V3 cords are water cooled, and soon will charge at 300kW.
Any chance the 12 new stalls are up and running before Thanksgiving? They looked close when I drove through last week, but who know. Would be great to open before the holiday!
Yes, but v3 stalls (grouped in fours, hence the A/B/C/D designations) are much more sophisticated in terms of power sharing and can even share power across cabinets (e.g cabinet 1 can share power with cabinet 3 via the DC bus) so as an end user the sharing is completely inconsequential. There’s zero practical effect on charging speed if you plug in to 1C while someone else is plugged into 1D.
All V3 superchargers will have this A-B-C-D numbers, indicating they are tied to a common cabinet. The only significance is when there is an issue such that a cabinet goes out for some reason. In that situation you will find that all four of the groups A-B-C-D stalls will be out of order. This can be recognized visually because the lighted "Telsa" logo on the stall will not be illuminated.
In my post above, I had a typo. The V3 has the thinner cable, and is water cooled.
"You can recognize the V2 chargers because they have a thinner cable. Yes, this seems counterintuitive, but the V3 cords are water cooled, and soon will charge at 300kW."
Ah yes, I misunderstood the OP. Agree with the above. Santa Clarita has placards/flags on top of each supercharger designating 250kW or 150kW which is nice to distinguish V2 vs V3