Latest activity Postings About
-
-
4SUPER9 replied to the thread RGB Ambient Lighting project for Palladium Model S - lets do it.All done with the doors! Took 10 hours total, which included: Removing one of the doors and re-doing the strip, since I did not like... -
-
4SUPER9 replied to the thread RGB Ambient Lighting project for Palladium Model S - lets do it.Finally started this project yesterday evening. I decided to run everything to the center console under the phone charger, since really...
-
4SUPER9 reacted to Kristoffer Helle's post in the thread Work in progress: stalks on 2021 Model S. (and optional round-y wheel) with
Like.
Im doing a write up now. Sadly I didn't take more pictures while doing this. But it's easy. Finishing tonight. The "new" stalks actually... -
4SUPER9 replied to the thread Yoke peeling.May not be the yoke, but rather the harness that feeds it
-
4SUPER9 replied to the thread Yoke peeling.Does anyone find the new horn is hard to use? I have to push very hard to activate it.
-
4SUPER9 replied to the thread Work in progress: stalks on 2021 Model S. (and optional round-y wheel).This is a project I would love to tackle, at least until Enhauto can complete their work. The more detailed information you can give...
-
4SUPER9 replied to the thread Supercharger - West Hollywood, CA (LIVE 2 Sep 2022, 8 V3 stalls).We could probably fight this, but I had no energy and just paid it, knowing that I was indeed in the wrong. Point of this discussion...
-
4SUPER9 replied to the thread Supercharger - West Hollywood, CA (LIVE 2 Sep 2022, 8 V3 stalls).Agreed, unless you are plugged in. They will nail you no matter what. I once was stopped in a bus stop in W Hollywood, and she wanted to...
-
4SUPER9 reacted to Mrbrock's post in the thread Supercharger - West Hollywood, CA (LIVE 2 Sep 2022, 8 V3 stalls) with Like.
Maybe try going to a busy downtown area with 2 hour parking and sleep in your car for 8 hours during the day and see if you get a...
-
4SUPER9 replied to the thread RGB Ambient Lighting project for Palladium Model S - lets do it.Thanks! Storage and display. It is a good temperature as is. Adding a cooler is possible, but will cost some significant $$, and we have...
-
4SUPER9 replied to the thread RGB Ambient Lighting project for Palladium Model S - lets do it.Also, looking at SSR's like this one, they come with an optional heat sink. Am I correct that with such low voltage coming through that...
-
4SUPER9 replied to the thread RGB Ambient Lighting project for Palladium Model S - lets do it.One like this?
-
-
4SUPER9 replied to the thread RGB Ambient Lighting project for Palladium Model S - lets do it.@Proppilot , what SSR are you using? I see a few on Amazon. The wiring seems quite a bit different that the standard ones we have
-
4SUPER9 replied to the thread RGB Ambient Lighting project for Palladium Model S - lets do it.So glad I could not only contribute, but actually be helpful! It is so intimidating with everyone else having some decent electrical...
-
4SUPER9 reacted to Proppilot's post in the thread RGB Ambient Lighting project for Palladium Model S - lets do it with Like.
My conclusions on the 'trigger' project. We have three solutions in play to turn the lights on and off @taekua with the Arduino...
-
-
Loading…
-
Loading…
