Recent content by Shizzrock

Boston area hit me up

The B and O system in my Audi was amazing. The model 3 is ok, but if you look at the frequency response there's all kinds of peaks and valleys you can't EQ out. which I find contributes to listening fatigue and an underwhelming soundstage.

then damn son

yeah I hear you, but it does 0-60 in over 3 seconds, so one of those numbers is off.

So that means either the Taycan traps higher than 124mph or does a 1/4 mile in under ten seconds. I just don't think those are the numbers.

yeah, $40. Although the red is amazing, the paint is the most disappointing part of the car, they really need to fix it.

I just put mine on, went for the painted gloss black ones on Amazon. Real simple install, although the rears are more solid than the front. There's too much flex in that wheel liner but they sit flush at least. One thing for sure, if you like your paint you will buy these. I have a little over...

Yeah, something is wrong then. That would mean it does a 1/4 mile in under ten seconds or it has more power at the top end than the bottom end, either way the numbers don't make sense.

This is a good parable, after meeting you and your wife at a Vermont supercharger quite randomly, you two were super nice. Slowly, like that movie Memento, I realized you were familiar to me, but couldn't place it. Little did I know that you were my nemesis online! It goes to show that a little...

I always post to clear this up, but 3dB is a doubling of power, which is a 10log scale. All of the measurements people use in these tests are SPL measurements, which use a 20log scale. So 6dB is an actual doubling of sound pressure, as in, when you double the pressure of sound waves to your ear...

I wonder if an iron wrapped in a cloth might help reactivate the adhesive. I have a single bubble but worry this will get worse

Why couldn't you just watch the video?

Yeah, still haven't received my spoiler. Still have paint issues. Still have water getting into my cabin from a car wash. Still get pushback or no comms from service. Every time someone posts a totally reasonable concern a thousand stans come on here victim blaming. Maybe empathize that these...

You may still be confused. SPL is 20log, not 10. A common mistake people make is to use the power ratio and equivocate it with sound pressure. When you double the power you increase 3dB, but that's not a "doubling" of sound pressure. Because SPL uses a 20log scale. When you cut the distance to...

SPL uses 20log scale, so 6dB is a doubling of sound pressure. 1dB is the difference from being 12 feet away from a sound source to being 11 feet away from a sound source. You can hear a 1dB change with a 1k sine wave relatively easily, but with full spectrum sound 1dB is very hard to discern.