Search results

Thanks...I made another SC appt. I hope these guys understand the issue....smh It's exactly limited to when I initially reported the off-center.....good news is everything is aligned and I don't look down at an off-center steering wheel....but the OCD in me is killing me when I turn all the...

Thank you for your assurance. I just did some test runs....Alignment is near perfect now but it's now limited by a little when turning all the way to the right. This tells me the root cause was the steering wheel was off-center....so instead of fixing that...they just did an alignment. I'm...

Since delivery of MY, I noticed the Steering Wheel was off 5-10% to the right. It was either alignment or the Steering Wheel is off a spline, etc. The vehicle appeared to go straight with the wheel off-center 5-10%. Regardless, I was going to let the SC techs take care of it. After picking...

Did you do the fronts? Your in NJ and I was curious

I’ve done a decent amount of research and have seen them all and here are my thoughts. “XPEL Prime XR Plus“ - Has a blue tint to it. Approx 95% match to OEM. If you have OCD and you just want to do the fronts...don’t get it. Excellent product for IR rejection and 20% or more cheaper than 3M...

Beautiful....I wish I didn’t have to deal with NJ laws or I would have went with 20% in the fronts. I also did 70% on the WS. Here is what 30% looks like for the fronts with OEM for the rears...

Just gorgeous...imho you have one of the best Y’s I’ve seen so far....

What tint did you use? So while I love the Xpel Prime XR Black...it’s has a slight black/blue hue...looks great on the Dark Blue Metallic paint...but slightly off from the OEM that has a slight brown/amber hue. No one will tell except me perhaps...I did the Front WS and Passenger and Driver as...

yes...if you also tint the rear it will match. For those like me who left the rears OEM you can get close but not exact. Looking at the picture...I’m amusing you also tinted the rears right? Your car looks fire...wow

Since I’m in NJ where it’s illegal to tint the front windows, I decided to leave OEM the rears and do Xpel Prime XR Black 30% for the Front and Xpel Prime XR Black 70% for the front windshield. Very happy with getting the windshield done. Total cost was $335 (front and ws). If I wasn’t in NJ...

I’m about to order it

Yep...it had shown up on my Y!!! Yippie!

Ordered from Taptes but now regretting it....looks like delivery is going to take over 4 weeks ‍♂️

It is....that’s why I might do 30%

Went ok but I should have picked up on the AC there and refuse until it was fixed. Seems they are swamped with a lot of cars in service. They will try to rush so you sign the dotted line. They gave me 20min but I took about 45min before signing.

Looks great! I’m def going to get that armrest now :). I also ordered puddle lights from taptes but delivery is slow it seems. No issues with steering wheel being off centered like mine? It’s minor at maybe 5deg but I have OCD..lol... Have you thought about full front PPF yet?

Sweet...I might look into that

Princeton, NJ

Received Vin XXX34 on 8/29 LR Blue Metallic w/ White & Inductions. Initially didn’t find any major issues. Trim alignment and paint was good. Then I drove home and realized the AC wasn’t working. Bought it back and it was diagnosed as failed Discharge pressure sensor. Parts Replaced or...

No it’s not split..it appears to be a metal material like a fastener or something to keep in place over the rubber...other posters had the same. The photos above are from each side (both front) should I be worried about the one chip in the bolt though?

Mine appear to be fine...XXX34 VIN...however you can see that they were probably put on by robots. Can you see a slight chip in one? I shouldn’t worry about that right?

Metallic Blue w/ White Interior and in NJ where tinting the front the illegal....so I want something that won’t get attention but ‘blends’ with the rear stock tint. Debating on 25, 30 or 35%...any advice?

Looks beautiful!

Sorry for the late reply. SignatureDetailing in Hillsborough $1700 for Full Hood, Full Fenders, Bumper, Lights (including fogs), side mirrors and center console (vinyl wrap or film) - Suntek Ultra 10yr Warranty Leeberbs in Hillsborough $1750 for the same as above except center console in...

Took delivery Friday only to send it back to the dealer for service Monday morning. A/C isn’t working and I’m getting the “Climate Keeper not available due to system default” message. Crossing fingers it will be fixed soon. Do you know how long it took them to diagnose and fix? Thank you!

Blue w/ White Interior and 20” inductions. Accepted delivery on Friday as the fit and finish was great. Car was beautiful....on the drive home noticed the A/C wasn’t working and after many reboots, etc its back at the dealer for service. There is also a message that says climate sensor has...

Thank you....it looks like I might pay the $8k to upgrade. Most of my driving these days is local roads vs highway and while I love autopilot...getting annoying to disengage and re-engage at every light...unless I’m behind someone...

I’m in Central NJ and got quoted $1700 for Full Hood, L/R fenders, Full Front Bumper and Side mirrors. They throw in front lights and fogs along with center console (Vinyl or PPF). This is for Suntek Ultra. I got a quote for $1750 for Xpel Ultimate Plus for the same but center console is...

Hi Everyone, MY Newbie here and was hoping you can advise. I have Auto-Steer (Beta) Turned on along with Visualization. Adaptive cruise and auto steer work fine but it does not stop at Red-Light and Stop Sign. For some reason I thought AutoPilot included these features. Or is it just a part...

If you mean holding down the 2 buttons until it goes black and it reboots...I tried 3x :(

with it being about 80deg and max being 81 temp setting in the car...unfortunately I can’t tell :(

tried that...no luck but thanks!

Thank you...I read the third link earlier. In my case...it’s not low, etc but it just doesn’t turn on. The compressor isn’t kicking in. Thus it’s only fan whether I toggle A/C on or off...While the fit & finish was good...you think if they did some quality control it would have been identified

Will post pictures soon. Central NJ, MY LR Blue Metallic w/ White Interior & 20" Inductions VIN: X342X I printed out the checklist that was posted here in these forums and I head over to Princeton, NJ. The service was impeccable and the staff was great. I spent about 45min with the car and...

I will talk to them about the rear rocker panels...thanks!!

It’s left the factory 10 days ago so I should be ok. But thanks for that tip!

wow...this is really good info. I didn’t even think about that. Was thinking the center wrapped in satin White would look cool...def not worth the headache of reflections and such. I also have OCD...lol. thoughts on Suntek vs Xpel? Or any other suggestion?

Hi Everyone, The day has come. MY LR Dark Blue Metallic w/ White Interior & 20" Inductions. Car came here earlier this week in Princeton, NJ as they texted me but I was away on vacation. VIN X342XX I will post pics to this thread tomorrow. Crossing fingers on quality and accepting...

I noticed some folks with Blue Metallic and/or White interiors started getting VINs in the last week or so....they probably make them all in batches.... curious...what is your build?

Ordered 6/8 Metallic Blue AWD LR w/ White Interior and 20” Inductions/ White interior and 20” VIN: *34XXX Scheduled Delivery date: 08/29

I didn’t get my VIN assigned until I got the text to schedule for delivery and the mvpa agreement. VIN *34XXX

Mind sharing which CU is giving 1.99%.....i got 2.14% from PenFed...I still have almost 2 weeks before delivery Thanks!

Update: Ordered 6/8 Metallic Blue AWD LR w/ White Interior and 20” Inductions ($53,990.00 prior to fees....was also adjusted -$5k by Tesla) Received Text on 8/11 stating 2-4 weeks from that day Received Text on 8/14 to schedule for delivery. Date options were 8/28 and 8/29. My financing...

Update: Ordered 6/8 Metallic Blue AWD LR w/ White Interior and 20” Inductions ($53,990.00 prior to fees....was also adjusted -$5k by Tesla) Received Text on 8/11 stating 2-4 weeks from that day Received Text on 8/14 to schedule for delivery. Date options were 8/28 and 8/29. My financing...

Ordered 6/8 Metallic Blue AWD LR w/ White Interior and 20” Inductions Received Text today stating 2-4 weeks from today

Ordered 6/7 Metallic Blue w/ White Interior LR, 20" Inductions, non-FSD. Still no VIN :( Crossing fingers to hear something soon.

It does not appear it will automatically reduce. Since I was not able to ‘Edit Design’, my advisor told me they can do it on their backend and it will be updated by Wed the latest. I basically had to email them for the request. I think you can also do it via Chat. I do not have a VIN but I...

I have no VIN but was unable to 'Edit Design' to obtain the updated pricing, so I called the advisor. My LR build Blue w/ White & 20" Induction ($56990) should be adjusted by Tuesday eod he said to $53990. He said because there is no 'Edit Design' button they have to do it on their end. This...

New Video posted by Ryan.... This makes me sad. I just ordered in a week ago, so I'm hoping things improve for the all of us. They better get their act together!

I ordered Blue as well but with White Interior and 20” Coming from white...I was hesitant on the Blue...but more and more I see it...I love it! Makes me feel 15 years younger as well...lol