Search results

According to the user manual power should be available at the low voltage power socket whenever the vehicle is considered "awake". That was also the behavior in my previous MX.

Update on this: Looks like the USB-C ports remain active when leaving the car with Sentry Mode enabled. If your power station can charge via USB then this solves the problem.

It's not worth your time unless you make less than minimum wage. It costs me around $5 to charge at home while I sleep.

I am having a similar problem on my MX with Bluetooth sensors. I recently swapped into my winter tires/wheels which have the original sensor that the car came with. These worked fine last winter. However, now only two of the sensors are connecting and they are both mapped to the wrong wheel...

What is the charging speed like on the Model X?

The ride is quiet and smooth as far as road noise is concerned. I came from a 2019 Raven with 20" wheels and I cant say that I notice much difference on the ride quality. Could be the updated suspension on the refresh. These are the ELECT version Scorpion Zero, made specifically for heavy...

Multi Coat. I missed ultra red by about a month.

You could, but that will cost you money too. You can find cheaper TPMS sensors on eBay. Save your other wheels in case you need a backup.

Given that the tongue weight is 350lbs for >=22" wheels and 500lbs for <22" wheels, I suspect that it has something to do with driving dynamics rather than hitch limitations. That said, I have 22" wheels and drove with 4 bikes from NYC to Saratoga Springs, NY and back with no issues (aside from...

I have previously reached out to Tesla for clarification. Looks like they have now updated the user manual to the following: We can do some basic math. The hitch receiver is 8" long, therefore we have a total length of 32" (8" + 24"). Since we can have up to 120 lbs at 32", thats a total of...

I am also having this problem. I use a 350w/h Anker battery as a buffer. Now that the warm weather is here I started noticing that the battery is not charging when I leave the car. This worked flawlessly in my old Raven MX with Sentry Mode on but sadly it no longer works. Whats the best way...

Ah makes sense. I assumed that you would be running some of those appliances on natural gas.

150 amp wasnt enough? What kind of power hungry devices are you running in your home?

My issue actually went away right after installing the latest software update.

I ended up getting a vin earlier than expected so I asked to put my order on hold until my original EDD. My order was automatically taken off hold on the requested date and a vin was assigned a few days later.

My two Blackfin XL inflatable paddle boards fit nicely in the subtrunk along with all of their accessories. I have traveled all over the county with them, from NY to Grand Teton, Glacier, Lake Tahoe, Lake Powell, Florida... best purchase ever!

There are too many things that can go wrong with a suction rack solution. In addition to the issues that you mention, you would also have to trust that the glass itself is secure enough to sustain the forces. It is also not practical if you have passengers in the rear.

I would love to find something better my self. The Tesla rack is a real PITA at superchargers and the boards get really dirty.

I am not sure. My friend who I swapped sensors with, was using the refresh 20" rims on his Raven, and he didn't say anything about dash lights. I wouldn't want to drive around without a TPMS though. It is really easy to not notice a flat tire on this car until its too late. No spacers needed...

In case you are wondering, the original 22" Model X Turbine wheels will fit on the refreshed MX. However, you will need to get the new Bluetooth TPMPS sensors to gain complete functionality. Enjoy!

This is happening to me also on my brand new 2023 MX. Have you been able to resolve the issue? The buttons are frustrating enough to use when they do work, last thing I need is for them to not work.

This is happening on my brand new MX. Have you resolved the issue?

I am experiencing this issue with the right turn signal button. It randomly stops working with no feedback when pressing. I’ve only had my car for a couple of days so this is extremely frustrating. It’s hard enough to get used to the new interface, last thing I need is for it to not work as...

Only the 3rd and 4th gen Xbox controllers support bluetooth. However it does not appear to work with the latter. When adding a controller it does say something about having a controller that supports bluetooth classic. I am looking into this to see if there is anyway to change the bluetooth mode...

I got an older XBox controller (third generation 2016) to connect. It appeared in the list of available bluetooth devices right away. However I could not get it to work with the latest controller (fourth generation 2020) which came with my Series X.

Including labor?

I picked up my car yesterday. It is flawless! No problem at all inspecting inside and out before paying. Dec 28 build date and has USS as well as the T logo in the back.

I am taking delivery next week but my price is still $10k lower than the current price. I suspect that my MX trade in would be worth less as well after this price cut. I am not going to change a thing!

I am taking delivery next week and they have confirmed that my car which has a built date of Dec 27 will have Ultrasonic Sensors. I am a little disappointed because it also means that I am likely not getting any new features.

Did anyone try to use the credit towards a CCS adapter?

They offered $56,700 for my 19 Raven with 62k miles, 5 seat, FSD. I am going to miss the free supercharging, but I'd say I got good use out of it until now.

Mind sharing VIN and factory build date?

VIN assigned today: 381xxx. Estimated delivery date January 20 - January 27. Sounds like there may be a small chance of receiving HD Radar since tesla will reportedly start marketing it in mid Jan. I'd really love the matrix headlights as well.

My right side rear quarter is also leaking into the trunk. Car is out of warranty. Any idea on how much it costs to remove and reseal?

Do you know if any spacers are required?

I hope so. I plan on using my 22" turbine wheels in my new car. I am not too crazy about how the new 22" wheels look.

If it’s a red MX then it was mine. VIN was assigned earlier than expected so I asked them to un-match me and put my order on hold.

I have the Bridgestone Blizzak DM-V2 on my 20" wheels. These are my first winter tires, so I have nothing to reference them to, but based on a bunch of research at that time, the Blizzaks were highly recommended. As one of my first test, I pulled over on a patch of ice in an uphill then floored...

I did sand it down to remove the large burrs. I then used a primer/filler spray to fill the smaller scratches followed by more sanding to make it smooth. I finally applied several coats of Rust-Oleum 248928 High Performance Wheel Spray Paint, 11 oz, Matte Black. It wasn't a perfect match which...

I just re-finished all 4 of my 22" turbine wheels with a couple of cans of spray paint. Body shop quoted me $150/wheel. Since I like to DIY everything, I put that money towards some tools. Floor jack, jack stands, torque wrench, breaker bar. Great investment! I can now swap my winter/all season...

Foll Quick update. They said that I can put my order on hold until Jan 1. Someone else will be the lucky receiver of a Red MX with 22" wheels and black interior.

$1,150

VIN assigned! Ordered Dec 2021 with original estimated delivery of Jan 2023. I was hoping that my actual delivery would be closer to my estimated date as I already have an MX and would love to get the matrix headlights on the new one. Has anyone had luck with postponing their order?

Tires are in great shape, no plugs or patches. 3 of the tires are 1 years old, 1 of the fronts is new (3 weeks old). Wheels are not included as I plan on using them with my winter tires. I am asking for $1,177. Prefer in person pickup unless buyer pays shipping. Tire Tread % Remaining Price...

Below is the question and response that I got from Tesla when asking about clarification on the 120 lbs limit. My question: Their response: Their response was helpful, but it left me with more questions. For example 120 lb at 632mm (25 inches) produces less torque than 500 lb would at 8...

Good point! A bag might actually eliminate the need for any padding. I will have to find one that is washable and durable enough to withstand the road grime.

My rack came in today and I got a chance to test it out. Looks like I can turn this into an excellent snowboard carrier with just a couple of minor modifications to prevent the boards from scratching the rack. I will have to source some kind of a rubber strip for the bottom track and the inside...

I ordered a 1UP bike rack to replace my Yakiam/Tesla rack which has a snowboard attachment. However, 1UP does not sell any accessories that would allow me to carry snowboards. As far as I can tell from pictures, it seems that it should be able to hold two snowboards in each bike tray. Has...

I just did a comparison between the Tesla Rack with max weight as per spec VS the 1Up Heavy Duty with the same load. You can see that the Tesla rack imparts twice the amount of torque as the 1Up tray. By this measure you can clearly carry more weight on the tray rack due to the shorter lever arm.

Same thing can happen with a trailer. Imagine going over a bump with a 5 ton trailer and the amount of force that would put on the car or carrying 5 ton up a steep hill. Again, I don't believe that it has everything to do with the hitch not being able to take the force, it is about vehicle...