Search results

I just had my November 2023 X in the service center for this exact same problem. They replaced parts, but did not fix it. The one that is more open is when I walked past the car. The one that is almost closed is after I walked away. Once it gets in that position it must be manually closed, or...

SG57, Just an update. It's still forcing logout every 6 hours, requiring me to sign back in manually every 6 hours.

I'm also on Pixel 6 Pro. It signs out every 6 hours and I have to manually sign in. This is with 2 factor authentication on or off. I did a reinstall, which didn't help. The program crashed several times during reinstall and I sent messages to the developer. He responded that he hadn't seen...

Very weird resolution to my problem. I made a call via Bluetooth (I was surprised it worked.) When I hung up, the streaming music was blaring. Apparently the car thought I was still on a previous call??? From a week earlier??? No further problems yet....

For the record, I should have replaced the compressor. It died within 4 months of that visit. I upgraded to MCU2 while they had the car. It was worth it.

I am in the same situation (AP2/MCU2 upgrade) with no audio. I think this started after the last software update (2022.4), and I just assumed it was a bluetooth issue. Today a had time to diagnose and it has no audio, except the ones required for driving (turn signals, alerts, horn, etc.) I...

I have the same problem with my Pixel 5. It is getting worse and the service center states it my phone and not the car. These problems keep getting worse with MCU1...

The MCU was no the problem for the AC: Update: They diagnosed a bad Thermal Controller Module ($430) and replaced it. (Although they said this was an unusual problem, they had one in stock.) After that was replaced they were getting errors from the Thermal expansion valve ($70) and replaced it...

The problem definitely seems to be fixed now. Plenty of MCU1 reboot issues, but the AC problem is gone.

Update: They diagnosed a bad Thermal Controller Module ($430) and replaced it. (Although they said this was an unusual problem, they had one in stock.) After that was replaced they were getting errors from the Thermal expansion valve ($70) and replaced it. They also said the LH Front Fascia...

I did the HW3 free upgrade last year with MCU1, having paid for FSD in January 2017. I have experienced exponentially more MCU issues since installing HW3. This is not reversible. My eMMC is not at end of life, yet. Last week I was quoted $2000 to upgrade to MCU2.

I have a 2016 AP2/MCU1 car with FSD upgrade. Many weird things have started since the FSD upgrade, including the incredible sluggishness of EVERYTHING. Most recently, as the outside temperature is increasing, the car does not blow cold air from the vents. At the SC last week: "Perform system...

I missed the announcement that Tesla increased the cost of MCU2 for AP2/2.5 models to $2000. Older cars are still $1500. Apparently this just happened this week.

2.2.2 seems to have everything back to normal. Thanks SG57!

I'm noticing the same. Based on the error messages from the Cabin Temperature Protection, I suspect the login is only getting through ~25% of the time, at best. I suspect this is all due to Tesla's updated security measures to access the API. I'm confident sg57 can figure it out. Thanks!

2.2.1 seems to be working. Definitely a delay logging in. But, it works! I found this app incredibly useful during our recent cold spell. I hate to walk out to a car covered in ice. Dashboard prevented that. Thanks SG57!

I uninstalled Dashboard, then reinstalled it. When logging back in, the change log stated that some people are having difficulty logging in. I was able to login after reinstalling. The connection seems to be intermittent, at best, at this time.

That didn't last very long. I'm unable to login again.

It appears I'm back in also. Thanks!

My update was 21 hours ago and is also 2.2.0. Prior to the error message it briefly states: "verified successfully".

It looks like the app updated yesterday. Hopefully we will get a fix soon!

I'm trying to log back into Dashboard and can't get in. After entering the username and password, followed by the authenticator code, I get the message in the screen shot: I have been relying on Dashboard for years. How do I regain access? Thanks for your help!

I'm in the same laggy boat. FSD upgrade with MCU1, Nov 2016 AP2.0. SC has "deleted files" and has recommended not to use USB drive for Sentry/Dash Cam. It gets better for a while, then lags severely again once the memory refills. This "upgrade" sucks. The last time.i asked they said they don't...

That's a good question. It effectively does not work. It routinely crashes MCU1.

After 24 hours without the USB drive, it seems to be normalizing again. I don't think FSD+MCU1 is going to work. Certainly cannot use Dashcam or Sentry with this configuration.

I originally posted this elsewhere, but could use any assistance offered. Nov 2016 AP 2.0 vehicle with 55k miles. My FSD computer upgrade has not been so positive. I did not upgrade the MCU (was not available). It originally was recognizing street lights signs but then quit, which I believe...

Well, that improvement only lasted a couple of days. Temperature readings are again super low, -49F this morning. Which makes the AC blow hot air when its 80-90 degrees outside. That's not a comfortable experience! They offered me a loaner (Enterprise rental) after 4:00pm on Friday , but I...

The SC says my eMMC is fine after a remote evaluation of the logs and blamed it on my USB drive. After pulling the USB drive for Sentry/Dashcam, everything improved. The drive was full, but not corrupted. They also deleted my navigation data. I'm using a new High Endurance SD card with a USB...

Did you just upgrade the FSD computer? Or did you purchase MCU2 also? My FSD computer upgrade has not been so positive. I did not upgrade the MCU (was not available). Not recognizing street lights or signs, severe lag before the backup camera starts, frequent Bluetooth reinitializing and...

Thanks, I appreciate the quick response. I knew I didn't have access to the Dashcam, but I could never find anything indicating the Sentry was fake on AP2.0. I'll quit wasting my time!

2016 S90D with AP2.0 hardware, 2019.16.2 software I have read a lot of threads and still have not found an answer. EVERY TeslaCam file is corrupted and unreadable. Tried 2 different USB drives, and now a 240GB KIngston SSD. I have turned off sentry and waited up to 60 seconds before removing...

Follow up: I called the service center. It took them about a week, but they fixed the problem remotely. The app is working normally again.

This has happened to me about every 2 weeks for the past 9 months. It always resolves with a scroll-wheel reboot, until 3 weeks ago when they had to replace the MCU. It has happened once since the MCU replacement. I find this to be the most frustrating aspect of owning my S90D. I have spoken...

Unfortunately, that didn't help. I noticed today that if I send "Lock" from my phone the lights flash but the doors don't lock. The car is clearly receiving the signal, but does not want to lock or unlock the doors. I looked at all the controls and settings again, I can't figure out what's not...

In TeslaFi i get: "CSRF check failed. Your form session may have expired, or you may not have cookies enabled." It will still honk the horn and flash the lights, but not unlock the doors or turn the AC on.

Recently my AP2 90D center screen would not come on, or reboot. The MCU and screen (had the yellow line around the edge) were replaced under warranty. Now I can't unlock the car or open the trunk via the app, but sunroof will still vent and close. I have checked every setting I can think of...

@SG57 it looks like you've been busy. After yesterday's update my widgets suddenly stopped working. I was too tired to get online and check what was happening last night. This morning I see the app updated again overnight and my widgets were gone. I reinstalled the widgets this morning and...

@SG57 Great job! We're back in business again. Thanks for the awesome support!

Is anybody else experiencing app crashes? I sent the crash email to @SG57 but was curious if I'm the only one.

@SG57 I had to set Background Services notifications to "no sound" within Settings to make the audible notification go away.

@SG57 This is why this app is worth supporting. Thanks for the quick response. You are correct about Oreo, on a Pixel XL. Since my post, I found within Settings the Notification Settings section and changed all the sound settings to "none" which eliminated the problem. If you've addressed it...

I started getting audible notifications with this update. Most often it was 2 chimes when Cabin Temperature Protection was updating. This morning it was clearly 4 different chimes as it worked through the below process. Because of the intrusive chimes, I turned all notifications off, and it...

Is there a way to have Temperature Protection automatically restart when my phone restarts? I have had a couple of instances where I forgot to restart temperature protection and had the car get hotter than I wanted. Thanks for a great app!

Mine fails 50% of the time, leaving and arriving back home. It is not predictable. It certainly may be a GPS problem, but this only started in the last month. Before that it worked flawlessly. Something changed in the code.

In your send screen shot under "Cabin Temperature Protection" you need to tap the circle icon. When it is in color, the feature is active.

I have noticed the same issue lately, except it tunes to the AM station I listen to ball games on.

I have noticed the same problem but with this last, not "silky smooth", update it doesn't always operate the door even when I push the button. My garage door opener transmitter works without a glitch. I suspect something has changed with the transmitter software. I hope they fix it soon!

I updated from 17.17.17 with AP2. This update is awful. It has driven me across the centerline more times than I can count; much more than 17.17.17 did. This is worlds away from "silky smooth".

After the second shim replacement, update to 17.17.17 and 100 miles of calibration driving my AP2 driver assist systems are fully functional! It took some time, but great service from the service center.

How accurate is speed clocking? MS90D 0-60 in 3.75 seconds was the best I recorded.