Search results

Interested. Will PM.

Xpel 3x8' is $264.. the 3M clear bra he linked is $176..

matrix black

Does it install without modification?

Yea it's always been my biggest gripe on the 18s. There's so much gap above the wheel. I have another set of 18s for winters. I will get wider tires to replace the all seasons and hopefully it looks better.

Installed the pillar delete in matrix black to match my matrix black chrome delete. The kit was easy to use. There's a lot of tucking under the weather sealing if you want a perfect hidden look. My car has some pretty wide panel gaps and I think it takes away the uniformity of the delete.

@SoCalMom I finally put the blue handles on my blue 3. For some reason the old ones I had from abstract ocean were a better match. I contacted them and they said it was also G217 so I ordered that and used the handle template. I may be cause there's was a tiny bit of chrome showing so it wasn't...

It's out there. Keep looking.

They fixed the Regen issue with software update back in March

Does someone know the length and width dimensions for the door handle template in cricut? Trying to line up the 1/2" box didn't work out the first time.

Ordered! you rock.

I'm in! But will it in available in matrix black?

fantastic! can you get a side profile view next? I have matrix black chrome delete so I'd considered getting the same for pillar. I'm still uncertain on how to tackle the parts of the chrome that don't match up with the pillar. I saw someone blend the back wrap piece so it curves into the glass...

Any update getting the measurements for pillar delete? Thanks.

Is there a good method for wrapping the trim corners? Each tab bunches up for me and can be seen from a few feet out.

I'm ordering 1x1ft too. I don't have experience with cricut, but my local library has a machine I can use. Hopefully someone there can help me figure it out before we do the final cut.

Yeah that works too. Let me know how much a kit would be. We can also talk through PM if you like.

@Nikola Pro do you sell material rolls separately? I'd like some to do a pillar delete.

Once you remove the cover it'll be more difficult to wrap since there's no base to hold the mirror steady.

Ordering the same one, 3M G217. it's close enough. I ordered the stick on's from Abstract Ocean and it's the same color. How much material did you need?

@Kenriko does your open source door handle template completely cover the chrome? I have my handles in blue now with chrome edges showing. I want to order blue vinyl myself and delete the handle completely.

It's a ploy for you to fall in love with EAP and force you to buy it now.

Just bought this for 1/3 the price. https://www.hobartweldshop.com/adapter-cord-14-50p-to-6-50r-230v-8-3-cable-1-5-long-for-champion-elite-champion-10-000-welder-generator/

Labor Day weekend Friday Rush hour - madlad

Thanks for the link. Google search was showing $60+ for an adapter. I have a 14-50 receptacle, but thinking about using this with a ChargePoint Home charger. Local utility is offering $500 rebate to install a charger, but CPH doesn't have a 14-50 plug. :/

Mine's been off for over a year. Don't plan on reinstalling

I had a blackvue battery before sentry and no longer use it. Maybe it's a defective, but the battery remains at full charge with sentry and no longer powers the dashcam.

same here. matrix black it is

@Kenriko on the pic of the blue M3 on product page, is that satin or matrix? Do you know what tint% is used? That's the first pic I've seen with blue that looks good. I may finally pull the trigger.

How much stretch will the vinyl see on matrix black? I'm worried it will mess up the texture. Whoever ordered it please report back.

Buy vinyl cling paper from crafts store and apply stickers to vinyl before windshield. Easy removal. Yes

I also picked up a used OEM spoiler and it was a PITA getting own adhesive off. 3M adhesive remover did wonders. My edges started to lift a bit, but stopped. I messed up and didn't align the top edge to the paint so there's a tiny gap for debris. I expect to have to redo it later on. I found...

Can you post a full side profile pic?

You don't need a shop. Get a short length of PPF over the high impact areas and try it yourself. It'll cost you less than mud guards.

I could never put ugly mud flaps on my car. Maybe on tesla truck. Some PPF will do just fine.

I hope there's a non black chrome delete. I don't like Chrome delete on blue car. Nardo Grey would be hot.

It could be the AC system clearing out the moisture to prevent odors. There was an update recently.

My guy also did this, but with an outdoor outlet. I guess it can be confusing if the brand name is right side up. https://www.amazon.com/Leviton-55050-Receptacle-Industrial-Grounding/dp/B00004YUNO

@Kenriko do you have links to the door handle wraps? I'm looking specifically for CF. If you could please add them to your original post.

PPF rocker panels would be a better option imo

Did you find an installer that will do the backwindow? I asked and it requires a special 5' wide order of crystalline. I have 70% on windshield and it's a life saving in the summer. I didn't do back window and glad I didn't cause it had to be replaced for defect stress crack.

Develop a resting bitch face

Might want to try the for sale section

Did you ceramic your PPF? How did it go? It didn't work out for me and I ended up wiping off all the coating.

I would trade up if I didn't drop the cost of AWD and more on mods already.

Pricing on frunk mat?

I did my bumper in xpel there last year. Good guys. The workers go to xpel for training. The wrap is precut and not custom FYI.

You could also remove the emblems and then spray.

I'm also getting a dirty socks smell upon each startup. I have a service appt in 2 weeks and will mention the leak as potential cause. Hopefully there's an easy (and cheap) solution

Full fender kit for Model 3? Have hood and bumper already.