Search results

I have had the same. Out of sudden the frunk opens. This happens only in park. The problem in my case was the emergency switch in the frunk. I disconnected it, and the frunk remains closed. The switch is quite simple, and easy to open. The green push button can be released with the small latches...

yes, I have the same. From my experience the sun roof is only leaking when the drain pipes are clocked. Park the car on an even surface, open the sunroof. Poor same water into the drain area of the sunroof and check that the water disappears. The sunroof has 4 drain holes, 2 in front which end...

i am wondering if there is a difference between US an European cars. In january I replaced my old charge port (manual close) with a motorized port. After mounting it, I had whole bunch of error messages in the display similar to your one. Then I initiated a software reinstall, and errors...

What is wrong with me? All the links on the page finally end in a forum.

Does anybody know what happened to the manuels?

I will unistall the interface. From 5 times I tried to use it, 3 times it did not work at all. And the 2 times where I could engage the hdmi switch, after 30 min. the screen starts to flicker. I am not sure if this is caused by the USB ipad HDMI interface, the switch, or the MCU. However, my...

1. No, when it went dark it was as as switched off. With the difference, that when it came back it has not been a reboot. 2. The MCU was replaced by Tesla in Jan 2020, and I assume it was a 8GB, because at that time Tesls replaced the whole MCU 3. I have had various versions, the car made every...

I have exactly the same problem. Engaging Auto pilot causes strange behavior. Sometimes it trigges the HDMI interface, something ist causes the center screen to turn black for may be 20 seconds. So i installed a power switch to cut off the power to the HDMI interface. My car is a P85 2014 with...

Me too, please...

Same with me, 2014 P85

Same for me. They told me, that to add this is buried behind the engineering barrier, and they can’t

I have finally uninstalled the camera hdmi kit. This kit is the base for the 360° camera. Since I have uninstalled it, I have no more problems with the MCU screen (turn dark from time to time). Also the AP switch on/off does not influence the MCU any longer. Too bad, that bearbu does nit respond...

I have also tried to contact bearbu, but without success. The hdmi interface shows some strange behavior in my 2014 AP1 car. When I switch on AP, the screen of the camera turns sometimes dark, and switches to camera or vice versa. The second problem is a little harder: From time to time the...

In my case the USB stick working again. It did not with last two versions. 2014 AP1 P85

2020.12.10 did not fix the problem with my usb drive.

No, not in my case. No USB shows up.... MCU1 car.

I have had a Mercedes E class 320 cdi 4Matic, until I made a test rent of a Model S. The Benz had to go...

My MCU fails in January with the obvious eMMC failure, and I got the MCU replaced. In my case it happens without shifting gears, it happened in park and during driving. Fo me it seems like a backlight failure/switch off.

It happens every two or three days that the MCU screen is suddenly black, then it becomes a kind auf dark grey, and than the MCU is back to normal. The radio stays on, the scene contend is the same. I have this since begin of March. My car is an AP1 2014 Model S. Anybody with similar experience?

Hello David, do not underestimate your channel. I am also waiting for a video from you on this subject!

How about the sound? Did you connect the phone by Bluetooth? And how to do with a fire tv stick or Apple TV?

I have also installed the kit on my 2014 double latch model S. It works, but I have to adjust the latch. The quality of the kit is very good, and the mechanics is very robust.

Can you send a picture where to find the pre-heating in the app? On my iPhone I can’t find it..

How do you check your remaining warranty time?

Yes, but the simple „suck in“ would be sufficient. But it is only available for the facelift.

Nobody an idea how to solve this?

My major concern is the frunk. There a soft close would be really helpful. I saw the frunk kit for the facelift version, but I would really only need the lock which „sucks“ the frunk hood. Has anybody seen something for this?

In my case the browser is completely dead after the update to v10. Before it was ok, I could use it, and reboot the MCU may be once a month. the problem in my case might be, that the update is not completed. When I came to the car, the MCU was black. A reset made it restart, and the version...

I got the V10 update for my S 2014 AP1. The update did nit finish, the MCU remains black. After a reset it came back with empty release notes, but with version 2019.32.11.1. The browser is dead, even a reset with brake pedal did not change it. Before the browser was slow, but working ok. Now it...

I have a 3D printer.....

Same here, I deleted the app (iOS) and after reinstalling it is working.

Hi, where to find your gap filler plastic? thanks

On Friday I was able to plan a service. I am lucky that I did it, today the button is gone again. On my iOS and on the website. Tesla, we know that you are not a car manufacturer, but software was ok so far. Well I don’t need farts, or other game stuff, but a better route planner. It seems that...

Here in Germany the Tesla Forum is full with member who are very unhappy with the service. To get an appointment takes months, spare parts are not available. Standard things like windshield can not be delivered for weeks. And now this: Quality issues lead NextMove to bail on its massive Tesla...

Do you have a Link?

Do you have pictures?

I have had the same in the past. Very often Dolby was turned off. With the current version 2019.16.1.1 the sound settings are at a different position. That is no problem. The Dolby button shows On, BUT it is reverse now. If it shows green (on), from my hearing Dolby is off. If I switch the...

Today I got a message, that my car is fixed. The cause was a loose connection at the A pillar, and they now fixed it with an additional tie. My is perfect again. The service was good - absolutely nothing to complain!

Could it be? It seems the first battery, but I have had no warning at all before. The car was perfect.

Last wednesday I pulled my 2014 P85 AP1 out of the garage, approximately 5 m. I got out of the car, kept the driver door open, and tried to remove the floor mat. I found the door sill not in place and pushed it. Then I removed the mat, and touched the brake pedal. I got a signal, and several...

Can anybody tell me, how I can invoke the SoC Battery Icon?

Today my car (P85) showed the same error messages. Another wired thing is, if I open the car, all the screen go on. As soon as I sit down, and close the door, all screens go off. Hit the break makes them on, with all these error. The car drives normal, without regen and auto pilot, cruise...

Hello, can you make some pictures?

In my experience this fixes the font problem only for a short time. The Tesla service gave me the hint to keep both wheels pressed, AND the break pedal. That solved my cache (font) problem

Thank you! With the next date at the SeC I will ask them. Could interesting what they say....

Hello, on my P85 I have switched of the door handle auto present. So now slightly push the handle, and the handle comes out. The point, only at front doors. At the rear doors nothing happens. The manual says that I have to push the handle to initiate the coming out. There is not mentioned „only...

In Europe the use of summon with the Fob is not possible/ allowed. So we here have to use the app, which sometimes works, most times not. I have tried iPhone and iPad. From 10 tries, 2 iPhone work, 3 iPad. I think it is a useless toy.

I have the same problem. A boot/reset with keeping both scroll wheels pressed solves the problem for 2 days. So I contacted the european support. They told me, that this is a cache problem and asked me to perform a full resert following this procedure: Car in P, Brake pedal pressed and both...

I have the same problem an my MS P85 AP1 12/2014. I usually starts with missing numbers at the fan speed. Speed 1-4 are shown, 5-9 is blank, 10 is shown as 1. After that the estimated range in the consumption graph is made of dots and line. Is it possibly Braille? After that the capital letter...