2023 Model Y ODB Adapter for connector in drivers footwell

[Rob_Quads]

I'm attempting to install a dashboard to my 2023 MY and having looked around most people have said that you can get power from the blue connector on the drivers (right) side footwell. Suggestions have been to get a ODB2 adapter which you can then plug an adapter in to provide power usb to the camera.

Having ordered a connector for a 2023 Model Y it arrived and was a 26 pin adapter. Now trying to fit the item the blue plug in question is actually a 20 pin connection. Looking around the only 20 pin OBD connectors I can find are for a Model X and looking at the pins they don't look right either as they looks to use the outer post pins either side for +ve and -ve but looking at my socket it only has a pin on one of the 4 outside pins.

Have anyone managed to get power from the blue socket? (I don't really want to go wire splicing at the moment)

The plug I am trying to use is shown in this photo

but the not all the pins are use in as shown in

 

[OfficialMark_H]

I’m not sure if it’s the same but on M3 its behind the drivers seat if I recall.

 

[Rob_Quads]

I believe there is another connector behind the centre console but that would require a much longer cable run than if I can tap into it on the drivers footwell