Picked up my MYLR7 on New Year's Eve 2022 and have put a little over a thousand miles on it since then. In anticipation of delivery I had gone overboard on various basic accessories and now having lived with them for a couple months I thought I would share my experience so far.
Curious also if anyone has accessories that I haven't seen/heard of that they would highly recommend. Cheers!
Maxpider floor mats - Tesla Model Y Floor Mats by MAXpider (Fits 2020-2023)
Got full coverage, and I'm pleased with the fit and relatively low lip. The logos are small and don't bother too much. Bottom is velcro-like so the mats stay in place firmly.
Tesla trunk storage bins - https://shop.tesla.com/product/model-y-trunk-storage-bins
Got them even though website said my model was not compatible -- it worked out fine.
ThinSGO Matte screen protector - https://smile.amazon.com/gp/product
Good enough, although application was a little tricky. Kind of wish I had gone with Spigen or AbstractOcean but not enough to change it out.
Ev3Designs rear vent covers - 2020-2023 Tesla Model Y Rear Vent Insert/cover set LR & - Etsy
Snapped in nicely, have a little bit of give but firm enough to prevent anything from rolling into the vent.
Basenor Jack pads - https://smile.amazon.com/BASENOR-Adapter-Storage-Protects-Battery/dp/B07YKK7LKH
Hope not to need these, but they are there in the frunk in case.
Basenor Mud flaps - https://smile.amazon.com/dp/B08VHQSXD1
Car didn't come with factory flaps, so I got these to reduce chipping on rear doors. Installation was simple, flaps mounted solidly with no damage to car. Ended up not installing rear flaps, as I prefer the clean look.
SanDisk microSD card reader - https://smile.amazon.com/gp/product/B07G5JV2B5
Working as expected with a 256GB endurance SD card in there. Planning to upgrade to the abstract ocean hub to get a separate USB stick for music
Basenor under seat drawers - https://smile.amazon.com/dp/B0BHQ84D4M
Go under the front seats. Fit even with the all-season maxpider mats, although you have to remove the drawer at an angle. Mostly got these to prevent stuff from rolling under the seat.
Basenor door seal kit - RETURNED - https://smile.amazon.com/BASENOR-Tesla-Soundproof-Weather-Reduction/dp/B09XB564L7
Seals seemed reasonable, but adhesive seemed pretty inconsistently applied / bad. Installed RPM's kit instead, but that one is already having issues.
RPM door seal kit - https://www.rpmtesla.com/products/m...ion-kit-24-with-20-off?variant=32384723025974
Questionable value, possibly tiny bit less wind noise. I separately got sound deadening so it helps absorb when the heavier doors get slammed. Had to apply additional double-sided tape around panel folds and corners. Adhesive started failing after a few days so had to do touch-ups. Holding up now so far, but if it starts to fall off more I may give up and remove it.
RPM Wind noise kit - RETURNED - https://www.rpmtesla.com/products/m...ion-kit-24-with-20-off?variant=32384723025974
Didn't end up needing it, as my roof glass gaps are somewhat tight and I didn't want to push the factory seal down under the roof glass.
RPM Under Hood Rain Gutter Filters - https://www.rpmtesla.com/products/c...-1-pair-19-with-20-off?variant=39610513686582
Requires pulling up frunk lining (clips), wasn't sure this was going to be useful but to my surprise I found leaves already in the space this filter would protect. Easier to clean out if the leaves are caught in the channel instead.
RPM Spoiler - https://www.rpmtesla.com/products/m...-carbon-fiber-from-xxx?variant=39572671070262
Looks great / understated on black exterior. Got it for the theoretical efficiency gains at high speed, and so far have been pleased with my Wh/mi. Fit was a little bit tricky, especially due to PPF. Used adhesive promoter and it appears to be holding firm.
RPM Sunglasses mount - RETURNED - https://www.rpmtesla.com/products/m...r-clip-on-for-the-roof?variant=40407589716022
Flimsy installation, and very little range of motion. Also blocks part of the camera such that you can't see the 3rd row.
RPM Sunglasses box - https://www.rpmtesla.com/products/model-3-y-storage-with-velcro-attachement?variant=40367898984502
Put this in the driver footwell, seems to be OK. Still on the lookout for a more elegant solution.
RPM Backseat trash pouch - https://www.rpmtesla.com/products/draft-back-seat-trash-bin-with-battery-led?variant=40540726591542
Good enough. Hooks onto back pocket. Has bag clips so you can put in a plastic bag. Better than trash ending up in the pocket.
Abstract Ocean glow-in-the-dark handle covers - https://abstractocean.com/products/m3y-gid-handle-covers
To make it easier to find the door handles... also makes it easier to differentiate my car from the others that look just like it
Carwiner center console tray - https://smile.amazon.com/gp/product/B08SLXNF3Q
Fits nicely, slides back and forth to cover deeper center console area. Can be hidden entirely if pushed all the way forward.
Carwiner Door pocket inserts - https://smile.amazon.com/dp/B097M8DLTY
These ones have a lip so any liquids will stay contained and won't soak the door fabric. Fit nice and tight. Back doors have a shallow factory liner (the emergency door unlock is under there) that I removed before installing.
Lusso Gear baby seat cover - https://smile.amazon.com/dp/B01MXQJWRA
Leaves an imprint on the seats, but better than the imprint of the child seat alone. Also protects a bit from spills. Keeping it on for now.
Boekey cup holder inserts - https://smile.amazon.com/gp/product/B0B8QSSK34
Adds tighter fit for smaller cups, but may prevent extra large cups from fitting. Works for me and I like the spill protection.
KMMotors center console cover - https://smile.amazon.com/dp/B09SH5HFS4
Adds height and softness to the center console. Unfortunately, rubs against seats when you raise the center console. Plan to keep it since I don't raise the console often and I like the feel better.
Rightcar Silicone License Plate Holder - https://smile.amazon.com/dp/B07CV5PLFM
Great so far but only had it on a few days (plates just came)
ThinSGO Cup trashcan - RETURNED - https://smile.amazon.com/dp/B085WMJ7GH
Would work alright in the center console, but too large to comfortably fit in the door (where I planned to keep it). Returned.
Meistar Cup trashcans - https://smile.amazon.com/dp/B09PMKG1TX
Placed in the front door pockets. A tiny bit small / loose and so it rotates on it's own (quietly).
Slime Flat Tire repair kit - https://smile.amazon.com/gp/product/B08MVFMYK9
Hope I don't end up needing this, and will attempt to plug before sliming to have a better chance at saving the tire.
Dynaplug tubeless repair kit - https://smile.amazon.com/dp/B00DSCN3E2
Hope I don't need this, but it's there if I need it.
I'll make separate posts about sound deadening and tint/ppf, all of which turned out better than I expected.
Curious also if anyone has accessories that I haven't seen/heard of that they would highly recommend. Cheers!
Maxpider floor mats - Tesla Model Y Floor Mats by MAXpider (Fits 2020-2023)
Got full coverage, and I'm pleased with the fit and relatively low lip. The logos are small and don't bother too much. Bottom is velcro-like so the mats stay in place firmly.
Tesla trunk storage bins - https://shop.tesla.com/product/model-y-trunk-storage-bins
Got them even though website said my model was not compatible -- it worked out fine.
ThinSGO Matte screen protector - https://smile.amazon.com/gp/product
Good enough, although application was a little tricky. Kind of wish I had gone with Spigen or AbstractOcean but not enough to change it out.
Ev3Designs rear vent covers - 2020-2023 Tesla Model Y Rear Vent Insert/cover set LR & - Etsy
Snapped in nicely, have a little bit of give but firm enough to prevent anything from rolling into the vent.
Basenor Jack pads - https://smile.amazon.com/BASENOR-Adapter-Storage-Protects-Battery/dp/B07YKK7LKH
Hope not to need these, but they are there in the frunk in case.
Basenor Mud flaps - https://smile.amazon.com/dp/B08VHQSXD1
Car didn't come with factory flaps, so I got these to reduce chipping on rear doors. Installation was simple, flaps mounted solidly with no damage to car. Ended up not installing rear flaps, as I prefer the clean look.
SanDisk microSD card reader - https://smile.amazon.com/gp/product/B07G5JV2B5
Working as expected with a 256GB endurance SD card in there. Planning to upgrade to the abstract ocean hub to get a separate USB stick for music
Basenor under seat drawers - https://smile.amazon.com/dp/B0BHQ84D4M
Go under the front seats. Fit even with the all-season maxpider mats, although you have to remove the drawer at an angle. Mostly got these to prevent stuff from rolling under the seat.
Basenor door seal kit - RETURNED - https://smile.amazon.com/BASENOR-Tesla-Soundproof-Weather-Reduction/dp/B09XB564L7
Seals seemed reasonable, but adhesive seemed pretty inconsistently applied / bad. Installed RPM's kit instead, but that one is already having issues.
RPM door seal kit - https://www.rpmtesla.com/products/m...ion-kit-24-with-20-off?variant=32384723025974
Questionable value, possibly tiny bit less wind noise. I separately got sound deadening so it helps absorb when the heavier doors get slammed. Had to apply additional double-sided tape around panel folds and corners. Adhesive started failing after a few days so had to do touch-ups. Holding up now so far, but if it starts to fall off more I may give up and remove it.
RPM Wind noise kit - RETURNED - https://www.rpmtesla.com/products/m...ion-kit-24-with-20-off?variant=32384723025974
Didn't end up needing it, as my roof glass gaps are somewhat tight and I didn't want to push the factory seal down under the roof glass.
RPM Under Hood Rain Gutter Filters - https://www.rpmtesla.com/products/c...-1-pair-19-with-20-off?variant=39610513686582
Requires pulling up frunk lining (clips), wasn't sure this was going to be useful but to my surprise I found leaves already in the space this filter would protect. Easier to clean out if the leaves are caught in the channel instead.
RPM Spoiler - https://www.rpmtesla.com/products/m...-carbon-fiber-from-xxx?variant=39572671070262
Looks great / understated on black exterior. Got it for the theoretical efficiency gains at high speed, and so far have been pleased with my Wh/mi. Fit was a little bit tricky, especially due to PPF. Used adhesive promoter and it appears to be holding firm.
RPM Sunglasses mount - RETURNED - https://www.rpmtesla.com/products/m...r-clip-on-for-the-roof?variant=40407589716022
Flimsy installation, and very little range of motion. Also blocks part of the camera such that you can't see the 3rd row.
RPM Sunglasses box - https://www.rpmtesla.com/products/model-3-y-storage-with-velcro-attachement?variant=40367898984502
Put this in the driver footwell, seems to be OK. Still on the lookout for a more elegant solution.
RPM Backseat trash pouch - https://www.rpmtesla.com/products/draft-back-seat-trash-bin-with-battery-led?variant=40540726591542
Good enough. Hooks onto back pocket. Has bag clips so you can put in a plastic bag. Better than trash ending up in the pocket.
Abstract Ocean glow-in-the-dark handle covers - https://abstractocean.com/products/m3y-gid-handle-covers
To make it easier to find the door handles... also makes it easier to differentiate my car from the others that look just like it
Carwiner center console tray - https://smile.amazon.com/gp/product/B08SLXNF3Q
Fits nicely, slides back and forth to cover deeper center console area. Can be hidden entirely if pushed all the way forward.
Carwiner Door pocket inserts - https://smile.amazon.com/dp/B097M8DLTY
These ones have a lip so any liquids will stay contained and won't soak the door fabric. Fit nice and tight. Back doors have a shallow factory liner (the emergency door unlock is under there) that I removed before installing.
Lusso Gear baby seat cover - https://smile.amazon.com/dp/B01MXQJWRA
Leaves an imprint on the seats, but better than the imprint of the child seat alone. Also protects a bit from spills. Keeping it on for now.
Boekey cup holder inserts - https://smile.amazon.com/gp/product/B0B8QSSK34
Adds tighter fit for smaller cups, but may prevent extra large cups from fitting. Works for me and I like the spill protection.
KMMotors center console cover - https://smile.amazon.com/dp/B09SH5HFS4
Adds height and softness to the center console. Unfortunately, rubs against seats when you raise the center console. Plan to keep it since I don't raise the console often and I like the feel better.
Rightcar Silicone License Plate Holder - https://smile.amazon.com/dp/B07CV5PLFM
Great so far but only had it on a few days (plates just came)
ThinSGO Cup trashcan - RETURNED - https://smile.amazon.com/dp/B085WMJ7GH
Would work alright in the center console, but too large to comfortably fit in the door (where I planned to keep it). Returned.
Meistar Cup trashcans - https://smile.amazon.com/dp/B09PMKG1TX
Placed in the front door pockets. A tiny bit small / loose and so it rotates on it's own (quietly).
Slime Flat Tire repair kit - https://smile.amazon.com/gp/product/B08MVFMYK9
Hope I don't end up needing this, and will attempt to plug before sliming to have a better chance at saving the tire.
Dynaplug tubeless repair kit - https://smile.amazon.com/dp/B00DSCN3E2
Hope I don't need this, but it's there if I need it.
I'll make separate posts about sound deadening and tint/ppf, all of which turned out better than I expected.
