My gen 2 neurio does not stay on line reliably despite strong WiFi at the neurio, but it is enormously better than my prior gen 1 neurio. I will say that in my view neurios are very picky about being in the same 2.4GHz SSID with the TEG, as they connect via their MAC address. Also if your router tries to run a combined 2.4/5GHz single SSID, with or without "speed enhancement" (pushing devices to 5GHz if the signal is strong) the neurio is likely to become uncommunicative.
If you are running a 2.4GHz SSID with the neurio and gateway on the same net (nor repeaters), have you tried turning the neurio off for ten minutes or so and rebooting it?
All the best,
BG
If you are running a 2.4GHz SSID with the neurio and gateway on the same net (nor repeaters), have you tried turning the neurio off for ten minutes or so and rebooting it?
All the best,
BG