Hello, i have followed the steps available on the forum to upgrade my model 3 to CCS capability. After i reinstalled the software i see the following errors
have anyone faced such errors and is there a resolution for this?
CP _a099 _cableState Unknown
Audience [service-fix]
Description The charge port (CP electronic control unit (ECU) is unable to confirm the state of the charging cable.
Set Condition The CP ECU is unable to determine the state of the charge cable based on proximity and pilot circuits.
Clear Condition The CP ECU confirms the state of the charge cable for at least 1 second.
Potential Impact Charging may not start or may be interrupted. Before entering drive, confirm the charge cable is not connected to the vehicle.
CP_a004 _proximityRationality
User Text Charging equipment not recognized Try again or try different equipment
Audience [customer, service-fix, factory]
Description The charge port (CP) electronic control unit (ECU) detects proximity voltage in an unexpected
Set Condition The CP ECU detects that proximity voltage is outside of the expected range.
Clear Condition The CP CU detects that proximity voltage enters the expected range.
Potential Impact If the issue is with the vehicle, it will not be able to charge.
DIa168_proximityDriveDenial
User Text Charge cable connected to vehicle
Audience Disconnect charge cable to drive [customer, service]
Description The reported proximity voltage indicates that there is a charge cable connected to the vehicle
have anyone faced such errors and is there a resolution for this?
CP _a099 _cableState Unknown
Audience [service-fix]
Description The charge port (CP electronic control unit (ECU) is unable to confirm the state of the charging cable.
Set Condition The CP ECU is unable to determine the state of the charge cable based on proximity and pilot circuits.
Clear Condition The CP ECU confirms the state of the charge cable for at least 1 second.
Potential Impact Charging may not start or may be interrupted. Before entering drive, confirm the charge cable is not connected to the vehicle.
CP_a004 _proximityRationality
User Text Charging equipment not recognized Try again or try different equipment
Audience [customer, service-fix, factory]
Description The charge port (CP) electronic control unit (ECU) detects proximity voltage in an unexpected
Set Condition The CP ECU detects that proximity voltage is outside of the expected range.
Clear Condition The CP CU detects that proximity voltage enters the expected range.
Potential Impact If the issue is with the vehicle, it will not be able to charge.
DIa168_proximityDriveDenial
User Text Charge cable connected to vehicle
Audience Disconnect charge cable to drive [customer, service]
Description The reported proximity voltage indicates that there is a charge cable connected to the vehicle