You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
So I was waiting at the light, to make a LH turn, when I noticed my small window for the cam, going black for a couple seconds, then coming back live. It was fine before the last update. Has anyone else noticed this? My model and year are in my sig.
I just installed this update a few days ago and today both my lh and rh Fender cameras are black. Lh seems to flicker now and again but right has been black. I tried a reset ie holding the two scroll wheels on the steering wheel but no luck.
After a messaging exchange with tech support, they indicated to have received multiple reports of this. They indicated that a 2 or 3 point reboot would solve the problem and it did. All I did was a two-finger reboot off the steering wheel and this has not manifested since then. Let me know.
I have done what I thought was the 2 point reboot by holding the two scroll wheels on the steering wheel. Is a 3 point the two scroll wheels on the steering wheel and the brake pedal?
I have done what I thought was the 2 point reboot by holding the two scroll wheels on the steering wheel. Is a 3 point the two scroll wheels on the steering wheel and the brake pedal?
Try a power down from the screen and let the car sit asleep for 30 minutes
If that doesn't work, the last thing you can try is disconnecting the 12V battery and also disconnecting the main battery for at least 30 minutes
but if the screen power down and sleep doesn't work, not sure this will either.
Well I got the drivers side working by entering service mode and doing a reinstall of software and then a 3 point reset. So far passenger side still has not come back online.
Looking at TeslaFi, 2023.2.12 seems to be getting wide distribution since yesterday.
I got it yesterday evening but I don't have the blind spot cameras set to display (and haven't driven in nearly two months.)
So just wanted to post here my final resolution. I was able to get a new repeater camera for the passenger side. Once I got the old camera off I noticed some green powder after disconnecting the coax cable from the camera. Upon further investigation I found that the center pin on the camera side coax connection was gone. I used a pick to clean out the remnants of the corroded pin that was left in the cable side of the connection. Once the new camera was plugged in it was working. My guess is that some moisture had gotten into the connection and corroded the copper pin. It's been working for a while now just wanted to post in the event that someone else runs into this issue