I had a micro-switch break in my G2.0 rear handle. Picked up a 2.1 unit, but it came bare, no LED, no harness or controller.
I'll order the jumper harness 1069106-01-B as well as the controller. Does anyone know where the controller mounts to? It looks like on the front door accoustic panels there is a spot for the controller to mount to, but correct me if I'm wrong, the back seals are soft? Or is there a newer replacement? Where do I mount the retrofitted controller to? The area where the original harness is clipped to at the back of the door?
Lots of videos on fixing the older G2.0 handles, but the cost of the upgrade kit is more than the new handle. Speaking of cost, how is the LED $100? Really? One too many zeros there.
Has anyone retrofitted the old LED with a new plug to fit onto the G2.1 sensor?
I'm assuming after it's done, I'll need to go to the SC to have the unit calibrated?
Can I re-use the existing seals (handle assembly and door cavity) with fresh butyl, or do the new vapor barrier seals come with sealant?
Cheers,
Brad
Since out of warranty, I've managed to fix or replace:
Front brakes
Power Trunk mounting clips and studs
4-way coolant valves
Retrofit aftermarket rear door speakers
Rear sway bar
rear parking brakes
I'll order the jumper harness 1069106-01-B as well as the controller. Does anyone know where the controller mounts to? It looks like on the front door accoustic panels there is a spot for the controller to mount to, but correct me if I'm wrong, the back seals are soft? Or is there a newer replacement? Where do I mount the retrofitted controller to? The area where the original harness is clipped to at the back of the door?
Lots of videos on fixing the older G2.0 handles, but the cost of the upgrade kit is more than the new handle. Speaking of cost, how is the LED $100? Really? One too many zeros there.
Has anyone retrofitted the old LED with a new plug to fit onto the G2.1 sensor?
I'm assuming after it's done, I'll need to go to the SC to have the unit calibrated?
Can I re-use the existing seals (handle assembly and door cavity) with fresh butyl, or do the new vapor barrier seals come with sealant?
Cheers,
Brad
Since out of warranty, I've managed to fix or replace:
Front brakes
Power Trunk mounting clips and studs
4-way coolant valves
Retrofit aftermarket rear door speakers
Rear sway bar
rear parking brakes