You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
So the wiring from the OEM latch is disconnected, the suction device pulled closed and you can't release the OEM lock to open? Ouch...Houston, we have a problem. While installing frunk soft closure thing I wired the power to it and then I was away for a minute my kid closed the frunk. Now it is showing as open in the app, but actually closed and I am not sure how to open it. Any ideas?
Yep. It's very precise description of the situation
Now the question to @dronus - how to properly transfer frunk open/close sensor to the new thing? Original part has two pins to align, new one not
Yes, the new one goes over the old one and they both go back in.Doesn't all the existing gear remain as is, with the suction device bolted over the top (behind, if you like, viewed from the front) of the OEM latch? And the suction device just pulls closed?
All good, let us know how you get on.And you absolutely right, new part just has a place to install it ass well which is confused me, still nervous after that last fail.
I had a prompt to upgrade my key while walking around officeworks.Technically it’s an accessory, so…
Has anyone managed to get their phone key to upgrade to UWB? I got the software update to the car today and updated the app and NOTHING. No prompt to upgrade the key? (I have the right phone for it too).
Wondered if anyone else was having issue?
Awesome!All done. Installed and working. Thanks guys, appreciated for your support.
Out of interest what did you use to connect the power wire to the battery?All done. Installed and working. Thanks guys, appreciated for your support.
Have a look at Amazon if you use them, I picked up a decent one to keep in the boot if needed. Bit more reliable than Aliexpress and easy to return if need be.Has anyone bought a cheap 22kw type2 cable from Ali express? Any feedback on the quality and a link?
Looking to purchase one for the rare times I need it and don’t want to spend much on it
I looked but decided that my car is worth more than the $50 id save if the cheap one cords or shorts out, damaging something.Has anyone bought a cheap 22kw type2 cable from Ali express? Any feedback on the quality and a link?
Looking to purchase one for the rare times I need it and don’t want to spend much on it
@Murphster how's the plastidip holding up?Four coats, I left the full 30mins between them and then waited four hours to pull off the tape. I was worried all morning something horrible would go wrong!
View attachment 1008459
I had the same question and was convinced here that buying local imported from China is better than just imported from China. I agree with it, because there is a resistor, which may be soldered in many different ways so it breaks off. Here is a video:Has anyone bought a cheap 22kw type2 cable from Ali express? Any feedback on the quality and a link?
Looking to purchase one for the rare times I need it and don’t want to spend much on it
Many vendors in ebay 22kw 3-phase type2 to type2 cable ~ $130 delivered. Good quality cable with a cheap carry bag makes it neatly organized.Has anyone bought a cheap 22kw type2 cable from Ali express? Any feedback on the quality and a link?
Looking to purchase one for the rare times I need it and don’t want to spend much on it