Hansshow 9” screen update file

[ElectricAnt54]

Hey could I please have the link to update file?

@Kinglex23 here is firmware v0.3.13 released 10/29/2022 for the 9" Linux based Hansshow dash console. It will not work forthelarger 10.25" versions. I stopped asking to see if new versions were available after this version.

 

[ElectricAnt54]

@Kinglex23 here is firmware v0.3.13 released 10/29/2022 for the 9" Linux based Hansshow dash console. It will not work forthelarger 10.25" versions. I stopped asking to see if new versions were available after this version.

Sorry I had to stop sharing the file. Ask Hansshow for it. They respond well via WhatsApp and their Facebook page is active too.

 

[ElectricAnt54]

@Kinglex23 , here is how I contacted hansshow In the past. Message Hansshow’s display console service technician via WhatsApp number +86 130 4421 9654 . When asking for firmware I always told them exactly what hardware I have. In my case, 9 inch hansshow linux display console ( not capable of over the air updates). I do this because they have multiple types of display consoles which might use other types of update files

 

[Dr_Arthur]

Thanks! I'm trying to figure out the problem I upgraded to 0.3.6 which broke my screens orientation. Not sure if it's because it's the 10.26 inch version or if its because its sold by a different company on amazon. I'm fairly certain its hannsshow, identical and takes the firmware.

Here is the 3.17 MCU version of HUD display for 9" screen that has multiple screens and with OTA upgrades & instructions on how to do. Enjoy!

V0.3.X_9.0_EN_UI02_HMI_0.3.16_MCU_V0.3.17_OTA.zip

drive.google.com

I’m wanting to download the update. Can you approve access. My email matches my name Arthur Czokalski. By the way, is this for the Android version of the 9 inch screen just to confirm?

 

[ElectricAnt54]

@Dr_Arthur , I stopped sharing the files. The files were for 9” Linux only.

 

[my95tsi]

Hi all! I figured I’d bring this thread back from the dead since I’m a new member. I’ve had my Hanshow 9” display for well over a year now and love it but it’s always annoyed me when the headlight indicators don’t work as intended on the screen itself. I reached out to Hansshow and they sent me the updated firmware and I followed all the instructions to put it on my usb drive. When I plug in the drive I hit start to begin the upgrade and then I get this message (attached). I’ve also taken a picture of my current version (attached) The file they sent me is a .rar file that I converted to .bin as it wouldn’t read as a .rar. What else could I be doing wrong here?

 

[craigcabrey]

Hi all! I figured I’d bring this thread back from the dead since I’m a new member. I’ve had my Hanshow 9” display for well over a year now and love it but it’s always annoyed me when the headlight indicators don’t work as intended on the screen itself. I reached out to Hansshow and they sent me the updated firmware and I followed all the instructions to put it on my usb drive. When I plug in the drive I hit start to begin the upgrade and then I get this message (attached). I’ve also taken a picture of my current version (attached) The file they sent me is a .rar file that I converted to .bin as it wouldn’t read as a .rar. What else could I be doing wrong here?

What do you mean by 'convert'? Did you extract it with an unrar tool or did you just change the extension to .bin?

 

[my95tsi]

What do you mean by 'convert'? Did you extract it with an unrar tool or did you just change the extension to .bin?

What do you mean by 'convert'? Did you extract it with an unrar tool or did you just change the extension to .bin?

So I just realized they sent me a zip file and I had to open it on my PC to unzip. I was able to get the correct files but for some reason it keeps saying the firmware is incorrect. Hansshow sent me two files after I told them the first file didn’t work. They are now telling me that the issue is the usb c adapter which doesn’t seem right.

 

[my95tsi]

Here is the 3.17 MCU version of HUD display for 9" screen that has multiple screens and with OTA upgrades & instructions on how to do. Enjoy!

V0.3.X_9.0_EN_UI02_HMI_0.3.16_MCU_V0.3.17_OTA.zip

drive.google.com

Can this be downloaded on the 9” Linux display without OTA update?

 

[TheMysticle]

Hey guys, does anyone have the UI03 OTA Update file from Hansshow or any other company that does the 9-inch Linux display? I tried updating to UI02 today but now the screen is stuck in a boot loop. Probably has something to do with Tesla's new CAN Bus update. I should have just kept it on UI03... Anyway, any help would be greatly appreciated

 

[mjburke89]

Hey guys, does anyone have the UI03 OTA Update file from Hansshow or any other company that does the 9-inch Linux display? I tried updating to UI02 today but now the screen is stuck in a boot loop. Probably has something to do with Tesla's new CAN Bus update. I should have just kept it on UI03... Anyway, any help would be greatly appreciated

I just received a version that will work, but I can't upload it here, too big. It defaults to the latest modern UI, but battery/remaining still doesn't work,

 

[Fr33domSkr]

I just received a version that will work, but I can't upload it here, too big. It defaults to the latest modern UI, but battery/remaining still doesn't work,

Hi,

Tried contacting Hanshow, but they are not responding.

Does your version work with the latest 2024.20 software update with the new CAN Bus?

If so, is there a way you could please share that file?

I have the 9" linux screen without airvents. I think it did have OTA though.

Thanks.

 

[mjburke89]

Hi,

Tried contacting Hanshow, but they are not responding.

Does your version work with the latest 2024.20 software update with the new CAN Bus?

If so, is there a way you could please share that file?

I have the 9" linux screen without airvents. I think it did have OTA though.

Thanks.

My version will allow you to get out of a boot loop. Once loaded the CAN Bus will not work correctly. But you just need to enable wifi and download update which will update MCU and allow you to choose the 3 UI options.

 

[mjburke89]

Try this google link, I will only keep it up briefly:

N32G452_V1.0.5_240611.zip

drive.google.com

.

 

[mjburke89]

Waiting for moderator approval since I am a new member, but if approved download from Google Drive and put it on a USB-C Flash drive or USB with a USB-C Flash Drive. Plug it into your device, you might need to keep it plugged in exit the vehicle, lock it, and re-enter the vehicle. This will allow 9" screen to turn off, once turned on it will find the update. You can have it update the MCU if it asks, but it will not correct the remaining battery and mileage. Once you connect to WiFi and run update search it will ask you to choose interface and update MCU when it restarts all will be working again.

 

[Fr33domSkr]

Waiting for moderator approval since I am a new member, but if approved download from Google Drive and put it on a USB-C Flash drive or USB with a USB-C Flash Drive. Plug it into your device, you might need to keep it plugged in exit the vehicle, lock it, and re-enter the vehicle. This will allow 9" screen to turn off, once turned on it will find the update. You can have it update the MCU if it asks, but it will not correct the remaining battery and mileage. Once you connect to WiFi and run update search it will ask you to choose interface and update MCU when it restarts all will be working again.

Thank you!