Just wondering if I’m misunderstanding something here regarding my MYP’s energy usage.
All of my charging is done at home via my Tesla Wall Connector @48 amps. (Actually, I did try a supercharger once for 15 minutes or so when I first got the car to make sure I knew what I was doing).
My car has 3239 miles on it & shows Total Energy usage as 957 kWh, resulting in 296 Wh/mi. Seems rerasonable, based on what I've read here & elsewhere.
When I query my wall connector with "http://wall.connector.uri/api/1/lifetime", substituting its IP address for “wall.connector.uri”, I get the following report:
{"contactor_cycles":79,"contactor_cycles_loaded":3,"alert_count":3,"thermal_foldbacks":0,"avg_startup_temp":27.1,"charge_starts":79,"energy_wh":1408681,"connector_cycles":44,"uptime_s":16034694,"charging_time_s":373001}
If I understand this correctly, the report shows that my connector has used 1408681 watt hours since new, corresponding to approximately 435 Wh/mi, which seems like a huge disagreement with the wall connector usage.
What am I missing here? Does that “energy-wh”: 1408681 not indicate the total electricity used by the wall connector?
Thanks for any explanation!
All of my charging is done at home via my Tesla Wall Connector @48 amps. (Actually, I did try a supercharger once for 15 minutes or so when I first got the car to make sure I knew what I was doing).
My car has 3239 miles on it & shows Total Energy usage as 957 kWh, resulting in 296 Wh/mi. Seems rerasonable, based on what I've read here & elsewhere.
When I query my wall connector with "http://wall.connector.uri/api/1/lifetime", substituting its IP address for “wall.connector.uri”, I get the following report:
{"contactor_cycles":79,"contactor_cycles_loaded":3,"alert_count":3,"thermal_foldbacks":0,"avg_startup_temp":27.1,"charge_starts":79,"energy_wh":1408681,"connector_cycles":44,"uptime_s":16034694,"charging_time_s":373001}
If I understand this correctly, the report shows that my connector has used 1408681 watt hours since new, corresponding to approximately 435 Wh/mi, which seems like a huge disagreement with the wall connector usage.
What am I missing here? Does that “energy-wh”: 1408681 not indicate the total electricity used by the wall connector?
Thanks for any explanation!