I bought this setup for my car late last year and have since upgraded. It was a nice setup, and just installing the woofers from the component set in the front doors made a difference in midbass and midrange. This setup can be run 3-way via a single crossover for each side. 2-ohm impedence matches the stock drivers so you'll retain volume. I believe the S and X both use the same speakers, so these should fit both cars.
All speakers will install without modifying the car. I had speaker adapters made for the tweeters and midbass drivers by Audio Designs CG, and I added the foam Fast Rings ($155). My local shop laser cut a set of acrylic mounts for the midrange speakers to fit in the stock locations, though the small screws for the midrange do not tightly thread into the acrylic. It was not a problem as they are captive by the dash panel. Now on to the speakers:
Infinity Kappa 60csx components:
Infinity Kappa 60csx Kappa Series 6-1/2" component speaker system at Crutchfield
Infinity Kappa 20mx midrange:
Infinity Kappa 20mx Kappa Series 2" midrange speakers at Crutchfield
Have original boxes for them as well. Looking to get $350 for the set.
All speakers will install without modifying the car. I had speaker adapters made for the tweeters and midbass drivers by Audio Designs CG, and I added the foam Fast Rings ($155). My local shop laser cut a set of acrylic mounts for the midrange speakers to fit in the stock locations, though the small screws for the midrange do not tightly thread into the acrylic. It was not a problem as they are captive by the dash panel. Now on to the speakers:
Infinity Kappa 60csx components:
Infinity Kappa 60csx Kappa Series 6-1/2" component speaker system at Crutchfield
Infinity Kappa 20mx midrange:
Infinity Kappa 20mx Kappa Series 2" midrange speakers at Crutchfield
Have original boxes for them as well. Looking to get $350 for the set.
Attachments
Last edited: