One of the key steps in getting electrical power from the tow hitch is to make sure that the wiring is connected correctly. The 13-pin outlet should have a positive and negative terminal which need to be connected correctly for power to flow. The positive cable should connect to the '+' side of the connector, while the negative cable should connect to the '-' side of the connector. If these connections are incorrect, then you will not get power from the tow hitch.
Also, make sure that all the wires in your tow hitch are properly secured and insulated to prevent any possible shorts or other malfunctions. Additionally, it's recommended that you use a circuit tester to verify that the connections are correct and that no power is being lost through any wires. This will help ensure that you get the maximum amount of power from your tow hitch.
Finally, if you still don't seem to be getting any power out of the electrics after double-checking all of these steps, then it may be worthwhile contacting a professional electrician to help you out. They should be able to diagnose the issue and help you get the power flowing again.
Good luck with getting your tow hitch up and running! Hopefully these tips will help you get the power you need from it.
I am going double check the connection is correct behind the bumper
Joseph
Thank you Joseph
One of the key steps in getting electrical power from the tow hitch is to make sure that the wiring is connected correctly. The 13-pin outlet should have a positive and negative terminal which need to be connected correctly for power to flow. The positive cable should connect to the '+' side of the connector, while the negative cable should connect to the '-' side of the connector. If these connections are incorrect, then you will not get power from the tow hitch.
Also, make sure that all the wires in your tow hitch are properly secured and insulated to prevent any possible shorts or other malfunctions. Additionally, it's recommended that you use a circuit tester to verify that the connections are correct and that no power is being lost through any wires. This will help ensure that you get the maximum amount of power from your tow hitch.
Finally, if you still don't seem to be getting any power out of the electrics after double-checking all of these steps, then it may be worthwhile contacting a professional electrician to help you out. They should be able to diagnose the issue and help you get the power flowing again.
Good luck with getting your tow hitch up and running! Hopefully these tips will help you get the power you need from it.
Joseph