Welcome to Tesla Motors Club
Discuss Tesla's Model S, Model 3, Model X, Model Y, Cybertruck, Roadster and More.
Register

Pic of your Model 3.......RIGHT NOW! [model 3 pictures thread]

This site may earn commission on affiliate links.
immediately after installing my MPP Comfort non-adjustables. Ride height is at the recommended starting point, which I think is another 10-15mm below where a M3P sits from factory?
 

Attachments

  • 6BDCB5C8-7A98-4752-A541-85DDE00A33A9.jpeg
    6BDCB5C8-7A98-4752-A541-85DDE00A33A9.jpeg
    605.6 KB · Views: 314
Ok, I’m convinced that the 2018 Model 3 Performance in rare Silver should be a Collectors Car. Plus just the performance increase to get to low 3s range 0-60, from the 4’s is ridiculous. Literally Ridiculous Mode. View attachment 826020


(moderator note)

merged with model 3 pictures thread
 
  • Like
Reactions: P-Lo801 and Adam3
Here’s mine with the “side swipe” marks. They’re hard to see unless you’re very up close. So I had just picked up my brand spankin’ new Tesla and was five minutes down the road when some moron in an SUV side stopped me and took off. Anyway, police got him so all is well snd I take it in next week to get everything taken care of.
 

Attachments

  • 848B7759-5C7D-439A-A847-F352BA758DB9.jpeg
    848B7759-5C7D-439A-A847-F352BA758DB9.jpeg
    698 KB · Views: 256
  • Informative
Reactions: tm1v2
The Dekagrams look awesome. I've been thinking about getting these in bronze.
What width and offset did you get?
Did you have any clearance issues?
Did you get the A face or B face?
B face. They are more concave. No clearance issues. I do have the MPP BBK in the front and I'm not sure if you need that to clear with the B face.
Mine are 19x9.5 +35. 265/35/19 continental DWS06 tires Square.
 
I like the

I like your Dekagrams. Will you give me more information on these wheels and tires? Are you running the same offset front and back. Any spacers? What tires? Where did you get them. My Model 3 P is stock height would you recommend any changes to what you have on a stock height? Thanks
yup. 19x9.5 +35 front and back. B face because more concavity. Continental 265/35/19 DWS06. I got them from Justin at MTM Autoworks. No spacers needed but hub centric rings. I've attached a pic of them on stock suspension. I am a LRAWD Non-P suspension (at this pic).
More pics and info on IG
my IG: @jiaa.yo
 

Attachments

  • 20210227_171629.jpg
    20210227_171629.jpg
    671.7 KB · Views: 231
  • Like
Reactions: ss71
Nice. Appears you got all the windows tinted, including the windshield.
Looks sweet. Sure that all around tint helps in the FL summers (sure does in the Texas heat wave summers - was oven-heat 110 yesterday). Is 45% on the front windshield hard to see out at night - I typically get 70-80% on all my vehicles.
I had no issue seeing out of it this morning at 4am. Clear as day.
 
Looks sweet. Sure that all around tint helps in the FL summers (sure does in the Texas heat wave summers - was oven-heat 110 yesterday). Is 45% on the front windshield hard to see out at night - I typically get 70-80% on all my vehicles
Here is a picture now during the day. If I remember I’ll take one when it gets dark.
 

Attachments

  • 0007E773-76C8-4E1B-8990-021AAFC9AE3B.jpeg
    0007E773-76C8-4E1B-8990-021AAFC9AE3B.jpeg
    510.8 KB · Views: 214