Search results

The new update 22.1.2 34013a3f updated today, so who knows if it works or fixes the problem(s) everyone seems to have re-downgraded to 21.44.1 when the complaints and problems started, and today is the 22.1.2

The people on whirlpool are starting to have the same problem too. Not sure what countries other than aus are the test audience for this version, but it's broken enough to not do it's one job in self consumption mode. In the meantime just hitting reset is enough to get it working until it goes...

Well, they let it stay on 21.44.1 for 131 hours (almost 5.5 days), and now it's back on the one that tou and self powered didn't work well. Only thing different since last time is the android and ios app updated the other day? {"start_time":"2022-02-24 05:00:17...

Here we go again. Downgraded to 21.44.1 again. {"status":"StatusUp","running":true,"connected_to_tesla":true,"power_supply_mode":false,"can_reboot":"Block Update in progress"} {"status":"StatusUp","running":true,"connected_to_tesla":true,"power_supply_mode":false,"can_reboot":"Yes"}...

It's drawing power from the grid again after the down and re-upgrade again. Looks like it'll need a hit the reset button to quick fix that again. for me it's broken 22.1.1 again, but had been fine after hitting reset on the gateway the other week (works better than stop/restart service) 20-50W...

Set to 100% backup reserve in self consumption mode, and it's only charging at ~1.7kW from the grid. Was at 54% and I let it run for around 10 minutes still on version 22.1.1 I'm still waiting for the multiple TOU rate setting to enable on multiple android phones. on the latest firmware for the...

15 mins ago auto re-upgraded to 22.1.1 hope they know what they're doing

ok follow up for anyone who clicks. 25 minutes ago the gateway downgraded from 22.1.1 to 21.44.1 21.44 -> 22.1.1 -> 21.44.1 there may have been an issue with 22.1.1

It's been over 36 hours since pressing the stop, then start button on the gateway web page and there's been no grid powering since then. I'd say having it start itself again seems to have gotten the system states/modes back in order again. Power flickered fast enough that the gateway didn't...

Very good advice to check. Unfortunately it's in self_consumption mode via api and self consumption on the gateway summary page. Just before 3am in self consumption mode this morning it started pulling 100W from battery and 200W from grid at 67.8% battery before all grid wasn't islanded, freq...

Hey all, Some may have noticed/upgraded recently (2 days ago here) to 22.1.1 (powerwall2 not plus) There may be a bug with self consumption mode (Self-Powered). In self_consumption mode, a power event may make the powerwall operate in autonomous/time-based control mode while still being in...

trying to enter new tou rate periods (in old peak/shoulder/offpeak mode) in the phone app fails. so i guess don't delete your existing rates just yet. if you have, hit add new rate period and press save. open the period entered, edit the times, and save again. add new rate again for...

Just got 21.39.1 updated an hour ago in aus, so pushed to the world starting from the other day i guess. The (android) app hasn't auto enabled the newer time based control rates yet which I was waiting for. the /api/status returns a json 'version' if anyone checks that in their monitoring...

ok, so inspect the certificate (download it/web browser). Subject Alternative Name DNS Name=teg DNS Name=powerwall DNS Name=powerpack That's the 3 names I've got and you can use as hostnames if you don't want to use an ip address probably. I renamed the wifi hostname to powerwall and it...

It's really annoying here too. had to go back to using an ip address or basic login just chops like you said. Good thing can still have the dhcpd hand out the same ip to the gateway 'HTTPSConnectionPool(host=\'teslapw2\', port=443): Max retries exceeded with url: /api/login/Basic (Caused by...

Ahh the button has appeared. This is what I was expecting to happen when Elon tweeted in back April when people were saying they have a system installed but no PTO and hinted at solar and battery off grid setup until the PTO and then be grid/solar/battery ( was in the solar roof and panels...

I'm assuming the bundling is also to solve the problem of Tesla looking bad after it costs a small fortune to get it all installed and then the utility company decides if you can use it. Hours after Elon's reply was when the announcement was from now on it's bundled

Updated from 1.50.1 an hour or so ago to 20.40.3 I guess that means Australia is rolling out the update now

The gateway web ui network screen now displays mac address of eth and or wifi when connected. handy for setting up dhcp I don't recall the previous versions showing mac, just the ip when connected

Got the update in .au around 9PM (+11) last night too during peak period of course (usually it's morning peak when updates) So around 29 January at 10AM UTC So far noticed today it preferred to charge a single PW at around 3KWh and started sending to grid excess above 3KWh from around 73% full...

May as well add some observations from AU install, so it may not be the same for everyone and the tesla mobile app only shows in 0.5W amounts so you won't see any/all of this, just used 0.3W grid for the day readings Version 1.41 Added support for utility grid connections in Switzerland...

Just got 1.41.2 10 minutes ago, was on 1.40.2. Australia/Victoria Friday, October 25, 2019 8:25:55.528 AM GMT+0 last_status_time":1571991955528,"version":"1.41.2" Still reports that the TZ is -7 and not +11, the Summary and phone app is still reporting +11...

My PW2 updated to 1.40.2 today, so could be regional, could be staged rollout. I was 1.38 -> 1.40.0 -> 1.40.2, it skipped the .1 update from this thread. What I noticed was from when 1.40.0 came out, the PW2 last communication timezone changed from +10, to -7 and is still -7 in 1.40.2 and the...