Search results

I have it. I had before hold mode too, when EAP would break. Mar 2018 build if anyone is tracking.

Just buy the Torx bit and you can usually move that little U latch on the body 2mm or so with out issue. I adjusted mine with no issue. Then you can take your time and make it perfect.

Horrible.

My seat back has the gap as well. If you push it in mine snap back into a different / closer position. But wiggle back out after a few min of driving.

You already give them all the data they need, whether you do FSD or not.

How did the bear manage to sneak out onto the road with out you noticing? I know that deer and etc will dart out in front quickly and unexpectedly, didn't think bears do that...?

Lol. Is this real?

I’m also 6ft 4in. You should be good. It is a little low which could pose a challenge to get into if your tall and on the heavy side (squatting pretty deep to come down from 6+ ft). Should be similar to your Pontiac in that regard tho. Once in, no problem. Plenty of room on both sides, there is...

The devil is in the details. Now EAP features are considered FSD features. So yes this hardware can do FSD, but not fully. And future iterations unlikely. Will they say “well you were able to do FSD features, just not everything that HW3.0 can do, etc”.

I have this too. The inside seal lip still touches so I have not found it to be an issue.

Where in Cali are you? If in the northern Los Angeles area I can recommend a few folks. Just send me a message. I only have 125amps in townhome. I had to have my panel swapped out because I ran out of slots (and all breakers were already half width). Then they ran 6# through wall about 10-15...

You can still add a 50amp 240volt circuit. If not enough capacity do 30amp, or 20amp. Any of those will make it non-issue.

Is the paint layer actually removed? Or just some of the clear coat? I’d suggest trying a well reviewed paintless dent repair. They may be able to remove the dent and wet sand the scratch for a reasonable cost. If you paint it you are probably looking at over 500.

Like the rest of the Performance buyers, they will send you the badge and spoiler after and you install it yourself.

Did you try and go through CC company to dispute? How did it turn out?

Hi all, If you add FSD to your Model 3 after purchase and your car is totaled, will insurance factor in the FSD cost? Or do you need to add that as an 'aftermarket add-on' type thing (such as custom paint, etc.) for that to be covered? Just curious and wondered if anyone had done the...

Still no word from Tesla... how about you? With all of the people running around checking for the 3K --> 2K price drop, I wonder if anyone else accidentally purchased? Maybe we are the only idiots who click randomly... lol.

Yes. Too easy to do! At least for a new purchase I think you have to reinput your cc info? I did call CC company and they said that they can open up a “dispute” as soon as it “posts”. Right now transaction is in pending status.

Omg! This happened to me too on Friday night. Phone slipped out of my hand partially while loading up the page to see full price in cart. Turned phone back around and saw the purchase was being processed. Had no intention of purchasing st $3k now that EAP will keep a bunch of these FSD type...

So what everyone doing - buy FDS now for 3k or wait for Elon to respond with his deal for exiting EAP owners?

Hmmm. What is the firmware that will increase power/performance? And what happens to all the people with "Enhanced Auto Pilot"? FSD price increased. Also, no longer able to add on FSD via website... This will be interesting.

And... it's no longer on the website to order. Wonder what happened.

Aww that is not a good sign. Anyone with the recent production version have a chance to pop it open and see if you can 1) adjust change rate or 2) add daisy chain connection?

Oh sorry realized you were talking sbout the one you made not the Tesla 14-50 wall connector. Please let us know if the Tesla 14-50 wall connector supports decreasing power output and if you can daisy chain. Thanks!

Awesome! Can you also daisy chain?

I’m really curious for someone to pop it open and check the following: 1) Does it have connections to support the daisy-chain of multiple chargers on a shared 50amp line (perhaps with 14-50 splitter). 2) Does it have the power selector to limit max power below 50amp. Anyone know by chance...

I really hate this too. All other cars let “auto” mode operate while keeping recirculation active or always on. This resets every time you get in the car and you have to press the recirc button. I left bug report on it complaining lol. Maybe more of you should report if you think this is a good...

Oh good to know it is still rolling out. Thanks.

I’ve done WiFi setup, done reboots of the console, and waited patiently. However no update passed 39.7 which I got like 4+ weeks ago. Everyone that I know personally has received the latest drive on nav versions 2wks ago. I’ve heard of updates getting stuck, anyway to check? Anyone else still...

Agreed and same :( The back/side padding breaking down too as it now touches center console. Passenger side doesn’t.

Thanks for linking. Didn't think to call them accent lights so didn't see it. Will have to arrange for mobile service.

Interesting. Was yours intermittently? or always off?

A few weeks back I saw a Model 3 behind me. One day time running light was lit brightly and one was dull lit. The led stripe did not glow brightly. Thought oh man that sucks to have headlights issues. Checked my car when I got home and it was fine. A couple weeks after another one behind me...

Can’t agree more. Sad that I did not get the AWD or P. Wish there was an option to add a motor to front of RWD! Haha. Would lose too much selling RWD and rebuying tho. Will now know for my next car (waiting for the Model Y). Regarding Bluetooth phone as key: it’s great but some phones have...

Any body/panel/alignment issue will go to body shop. You will drop off car with Service Center, but they will take it to a body shop. If it's not noticeable, I'd say leave it alone.

Never had this issue before. But with 21.9 now it happens 50+% of the time. Switch to speaker and it’s fine. Definitely a car issue. Hope they fix in next firmware. Really annoying.

And which ceramic did you do? :)

What did Doug say about your fender rough area?

Did you have to wait for a while for ppt to fully cure before doing the ceramic coat? I'm thinking about doing it too.

You too Drew! Thx for coordinating. How did your full PPF turn out after the dry time? Mine has a bunch of bubbles, but Doug said will go away or they will tune up when I go back in a week. Overall the install looks great and totally invisible. I do have one concerning spot on edge of driver...

I was tempted to do the matte too. But then it doesn't match the gloss black trim on door areas. So I'm doing clear.

Oh man. This! It annoys me cuz it does not save. I hate sucking in the toxic fumes from ice in front of me. Want recirculated air only.

What are these big dark side expenses you have seen? Just curious. I have thought it's simpler and less things to go out on a Tesla/EV then a normal car. Big ticket items I think of are drivetrain related, but those are all 8 years. So a while before it passes. Non-drivetrain is probably...

Any new work done? Looking for pics! My car goes in a couple days.

So nobody in our whole HoA community has a gate opener that can sync with homelink. I tried all mine and other neighbors. Nobody had success. Then one neighbor had to get a new remote from the HoA cuz they got another car. It had a sticker that said “master” on it. They tried it and it...

That sucks. You can replace that trim pretty easily (roll down window, lift up edge while curling outward, and just finger step down - no screws, glue, etc to worry about). Maybe train yourself to push the door with your fingers and not ring and reward yourself with a new trim price after your...

Wondering who got the retrofit as well!

Awesome Anh. Pics do look great. Glad it came out so nicely. Hoping for the same from Concours!

Yeah, I'm confused if your comparing with Doug's or not too.

I don’t really see anything but a minor swirl scratch in one of the pics. You can have a good detailer do a quick sand and it will not be noticeable (or research the right sandpapers and do it yourself). Also the touch up paint that Tesla sells is really great and masks little things well.