-
Want to remove ads? Register an account and login to see fewer ads, and become a Supporting Member to remove almost all ads.
Aftermarket Wheels on Model 3
- Thread starter kbecks13
- Start date
THESE LOOK GREAT
dmd2005
Active Member
Those SV103 wheels look nice. I almost ordered the SV103 or SV104, but I picked up my set of SV107 wheels today and I’m impressed by the finish. The brush strokes are uniform, the powder coating is perfect and there are no runs nor blobs in the clearcoat and I wasn’t expecting to receive color matched valve stems and valve caps as well. I’m gonna ceramic coat them on the weekend after getting the tires mounted.
Attachments
Thanks. Actually those are sv501. There are some minor differences that makes the 501 lighter
dmd2005
Active Member
The 501’s are even better for range then. What color is that? It looks like brushed bronze tinted or brushed black tinted in that lighting.
It is brushed black tinted. Like yours the finish is perfect.
EVS Motors
Former Vendor
We're back at it again with another awesome wheel promo. Like our other promos, once the sets sell out, it's over!
The newest addition to the Vossen CV Series, the CV10 is a new take on the classic, concave styling that originally defined the Vossen brand. A complex, bi-level spoke pattern is accentuated with the two-tone Silver Polished standard finish, while Satin Black creates a menacing alternative.
Vossen Wheels CV10
Size: 20x9 / 20x10.5
Fitment: Non-performance and performance Model 3's
Finish: Satin Black or Silver Polished
MSRP: $2200 + shipping
Special Pricing: $1899 shipped in the continental US.
Only 3 sets left in Satin Black and 1 set in Silver Polished.
We are also selling 1 pre-owned complete package, if you're looking for an incredible deal. No curb rashes or dents.
Package includes:
Rims: CV10 in satin black
Tires: Michelin Pilot Sport 4S tires (lightly used--200 to 400 miles) - 245/35/20 | 285/30/20
TPMS sensors installed
Mounted and Roadforced Balanced
*lug nuts not included*
MSRP on entire package: $4800
Special Pricing: $3650 shipped in the continental US. Only 1 set.
If you have any questions, it's best to pm me or call 888-878-2213. Thank you.
The newest addition to the Vossen CV Series, the CV10 is a new take on the classic, concave styling that originally defined the Vossen brand. A complex, bi-level spoke pattern is accentuated with the two-tone Silver Polished standard finish, while Satin Black creates a menacing alternative.
Vossen Wheels CV10
Size: 20x9 / 20x10.5
Fitment: Non-performance and performance Model 3's
Finish: Satin Black or Silver Polished
MSRP: $2200 + shipping
Special Pricing: $1899 shipped in the continental US.
Only 3 sets left in Satin Black and 1 set in Silver Polished.
We are also selling 1 pre-owned complete package, if you're looking for an incredible deal. No curb rashes or dents.
Package includes:
Rims: CV10 in satin black
Tires: Michelin Pilot Sport 4S tires (lightly used--200 to 400 miles) - 245/35/20 | 285/30/20
TPMS sensors installed
Mounted and Roadforced Balanced
*lug nuts not included*
MSRP on entire package: $4800
Special Pricing: $3650 shipped in the continental US. Only 1 set.
If you have any questions, it's best to pm me or call 888-878-2213. Thank you.
Great thread ... been searching through it as taking delivery of an AWD LR (non-Performance).
Sanity check before order. Any issues/concerns with the following?
Front: 245/40-19 on 19x8 with 40mm offset
Rear: 275/35-19 on 19x9.5 with 40mm offset
I wanted to keep the size about same as stock 18in or slightly bigger (calcs to about 1% taller) and same front to rear size (calcs to within .4%).
The 8in front might be a little on narrow side but I don't mind some wheel protection.
Went staggered setup as want a wide rear but hopefully keep efficiency loss to minimum with fronts still fairly small/tucked in.
Hoping the offset and tire width selection will produce a flush install with fenders but this I am more unsure of and curious of thoughts on this.
Sanity check before order. Any issues/concerns with the following?
Front: 245/40-19 on 19x8 with 40mm offset
Rear: 275/35-19 on 19x9.5 with 40mm offset
I wanted to keep the size about same as stock 18in or slightly bigger (calcs to about 1% taller) and same front to rear size (calcs to within .4%).
The 8in front might be a little on narrow side but I don't mind some wheel protection.
Went staggered setup as want a wide rear but hopefully keep efficiency loss to minimum with fronts still fairly small/tucked in.
Hoping the offset and tire width selection will produce a flush install with fenders but this I am more unsure of and curious of thoughts on this.
I don't think a 18x8 with a 40 offset will look good without a spacer since it will be really tucked in compared to the rear. Do they offer 19x8.5 with a 30mm offset?
The wheels I am looking at are offered in a 20mm offset too but was thinking this is too extreme, especially for the front. Its 5mm more offset than stock so thought would be good but perhaps need to re-think this. Was going to see what the thoughts on the 20mm offset would be for the rear too?
A 20mm offset on an 8" wheel will push it out 14mm.
Use this for reference: https://www.1010tires.com/Tools/Wheel-Offset-Calculator#
I agree use the calculator and since you want to stagger the size of the tires that will also change the look.
pkalhan
Member
Damn these looks amazing!! General question...would 20s fit on the regular dual motor long range Model 3?
EV-Tech Exp
Member
I'm thinking about a set of gold/bronze wheels on my blue M3 - has anybody got a similar setup?
Similar threads
- Marketplace listing
- Marketplace listing
