Vendor eas | ADRO Tesla Model 3 Widebody Program [Sneak Peek]

[tom @ eas]

Upcoming rendering of the new Adro Widebody Model 3 kit. Kit will consist of Widebody Fenders, Front Lip, Rear Diffuser w/ Winglets, Side Skirts and Optional AT-S Rear Wing. Adro has received tons of requests from our Tesla friends to build a widebody Model 3, but need to secure 7+ commitments, each supported by a $500 deposit. Are you in?

• Adro Model 3 Carbon Fiber Front Lip
• Adro Model 3 Carbon Fiber Side Skirts
• Adro Model 3 Carbon Fiber Rear Diffuser
• Adro Model 3 Fiberglass Wide Overfenders (front and rear)
• Adro AT-S Rear Wing (Optional)

MSRP for the kit: $5,500. Once we can secure 7 slots, the kit is greenlit and enters production.

Questions? Comments? Gotta have one? PM me directly if you have any questions or are ready to pull the trigger and need an order form.

 

[Soul Surfer]

While the kit looks amazing, I question the viability of slamming the car that low without damaging the battery system. I do realize that it’s a rendering, though.

 

[E.Potter]

My new obsession… I will have this beauty and I will drive that car hard AF…. Like it’s meant to!!

 

[GreenHokie]

My new obsession… I will have this beauty and I will drive that car hard AF…. Like it’s meant to!!

You’ll be the baddest cat in town!!

 

[E.Potter]

Also the most worried… lol…. Look I had a widebody Z and the F430 was my fathers and we would walk out the mall and have women taking pictures on our cars… sitting on them and all kinds of crap…at least now I can talk through the car…. Can’t wait to that reaction

 

[GreenHokie]

Also the most worried… lol…. Look I had a widebody Z and the F430 was my fathers and we would walk out the mall and have women taking pictures on our cars… sitting on them and all kinds of crap…at least now I can talk through the car…. Can’t wait to that reaction

Get off my damn car, beeeotches!!

 

[E.Potter]

Pretty much…. Unless you’re hot then get in… although I’m married now and my wife would kick my ass … and then hers’

 

[E.Potter]

Been going back and forth with my wife about this widebody, and she is ok with me getting it, the problem is I’m slowly changing my mind…. I love the way it looks, but how long will it last… this is my daily driver, and although NC roads are pretty damn perfect…. I’ve hit several items on the road from people dropping stuff off their pickup trucks…. And it happens OFTEN here… so I’m thinking of a more subtle widebody…. Something easily replaced… LIKE CMST with the ADRO front… I’m not sure…. I’m kinda lost now. But I will definitely do a widebody because I want the wider WORK wheels… any thoughts??

 

[hyp36rmax]

While the kit looks amazing, I question the viability of slamming the car that low without damaging the battery system. I do realize that it’s a rendering, though.

Most folks slamming their car like this rendering are most likely hard parked on decompressed air suspension, it's all good. Fortunately this car and parts are still out of reach from those who would drive around with whack massive negative cambered low to the ground suspension setups.

 

[E.Potter]

Still on the fence…. I love the ADRO widebody,… it’s just sooooo much to cover as far as work goes…. The CMST one can be done in a weekend… the ADRO one will take about a week for me to complete due to all the CF (CF MUST be PPF covered) and body work… also the price…. I’d have to wait a little longer to get the ADRO one… but may be worth it…. I don’t know…I’m not as well off as a lot of guys in here hooking up their car…. Lol….. I’m thinking of just waiting and doing the ADRO which is the way I want the car… we shall see…

 

[canasion35]

Still on the fence…. I love the ADRO widebody,… it’s just sooooo much to cover as far as work goes…. The CMST one can be done in a weekend… the ADRO one will take about a week for me to complete due to all the CF (CF MUST be PPF covered) and body work… also the price…. I’d have to wait a little longer to get the ADRO one… but may be worth it…. I don’t know…I’m not as well off as a lot of guys in here hooking up their car…. Lol….. I’m thinking of just waiting and doing the ADRO which is the way I want the car… we shall see…

Wait for the ADRO…their fitment and quality is on another level IMO. Out of curiosity - why is PPF on carbon a must?

 

[tom @ eas]

Wait for the ADRO…their fitment and quality is on another level IMO. Out of curiosity - why is PPF on carbon a must?

Would assume to protect from rock chips, being so close to the ground.

 

[E.Potter]

PPF is really the only way to keep CF looking like new when so close to the ground…

 

[hyp36rmax]

PPF is really the only way to keep CF looking like new when so close to the ground…

This is true, how often are folks doing this. is the the idea to only wrap the top of the lip or the whole thing. bottom will scrape eventually. I think there are scrape pads we can buy now to mitigate.

 

[tom @ eas]

This is true, how often are folks doing this. is the the idea to only wrap the top of the lip or the whole thing. bottom will scrape eventually. I think there are scrape pads we can buy now to mitigate.

You're right on the underside, we have scrape pads like you're describing here:

Acexxon - Universal Lip Protector Kit

Without question, aero enhancements are amongst the most visually impactful modifications you can add to your car. Indeed, adding a carbon fiber front lip is especially popular; it instantly transforms the front of the car and helps distinguish it from the crowd. However, that added aggressive...

europeanautosource.com

 

[E.Potter]

They do sell scrape pads… however they are expensive for no reason when I can easily fabricate them on my own for way cheaper… I’m really more concerned with rock chips than the underside… but I will fabricate something for the underside as well..

 

[tom @ eas]

First of the Adro Model 3 widebodies fresh out of the photobooth, kits are preparing for shipment now.

 

[adizon]

Looks so good, aggressive!!

 

[Cypcode]

Love the spoiler!