Frunk Reinforcement Part Failure

[hridge2020]

I made them in petg. They've been holding up fine. If you want I will print them for you but you have to pay shipping and some money for filament/electric/time.

put your stl file to share on here.

 

[Timbo2]

put your stl file to share on here.

Model 3 frunk reinforcement part by joanquro

ENG:The Tesla Model 3 frunk has two parts (1131205-00-C) that are poorly designed and break easily when you remove the panels on the frunk area and place them back. I designed a part that holds inside the defective part and should avoid breaking the original part. You have to place the original...

www.thingiverse.com

 

[tomhenry3]

Here is another 3D printed solution that can be glued in or back drilled through the two holes provided and screwed or bolted in place.

 

[hridge2020]

Here is another 3D printed solution that can be glued in or back drilled through the two holes provided and screwed or bolted in place.

Great post the stl file for everyone..

 

[EVnut]

Here's my solution from 1/2" PVC pipe. Cut to 55 mm, glued in place. Needs a slot cut at the back to clear the angled brace.