Here’s what I did in my garage. I used AppleTV AirPlay to project the Tesla logo and letters on my 65” tv. Then I covered the tv screen with some thin paper. I used masking tape to hold it in place. (I used some cheap paper from a paper table cloth roll.) I then traced the logo and letters with a pencil - being careful not to damage the tv screen. Then I placed the paper on top of a piece of foam board (1/8” thick or so). I taped the paper in place, and I used an X-acto knife to cut out the logo and letters. I did this on my kitchen counter with a piece of plywood underneath, so as to not damage the counter top. After painting the wall with the Benjamin Moore Tesla red paint, I used some Command Poster Strips to attach the logo and letters to the wall.