Aftermarket Wheels on Model 3

[P-Lo801]

How about buy wheels and lugs from an experienced retailer/installer?

So basically, make sure that I buy the lug nuts from the same vendor as my wheels.

 

[Zcd1]

So basically, make sure that I buy the lug nuts from the same vendor as my wheels.

Sure - if they're any good at what they do, they'll know what fits best...

Personally, I buy all of my wheels and tires from the same guys at Discount Tire/America's Tire. I've known them for years and they've never steered me wrong.

 

[boostftw]

dang those do look pretty good. Car needs at least a 1" drop, but nice to see these wheels exist for reals!

All set, dropped on Eibach springs.

Looks good. What do those things weigh?

 

[Adam3]

All set, dropped on Eibach springs.

Are those tires size 235/35/20? Do they look "stretched" or is sidewall flat? Looking at buying those wheels and using my stock 20" tires.

 

[BLKMDL3]

Are those tires size 235/35/20? Do they look "stretched" or is sidewall flat? Looking at buying those wheels and using my stock 20" tires.

They are 9” wide FYI. I personally would go >245

 

[jkoya]

All set, dropped on Eibach springs.

Very nice - love those wheels !!

 

[ECCtechguy]

Working on that, Eibach springs on order.


Unfortunately not but I will once I do the spring install.


Unfortunately didnt get a chance to weigh, but I will once I do the spring install.

A couple shots of my other Model 3:
Volk Racing TE37 Ultra Track Edition V2
Rotora Big Brake Kit
KWv3 Coilovers
Vorsteiner Volta Aero Kit

View attachment 530571

View attachment 530574

View attachment 530572

Did you install the front lip yourself? Looking for install guide ideas.

 

[ECCtechguy]

All set, dropped on Eibach springs.
View attachment 531365


View attachment 531366

Did you get them from tesla? What was the cost? I have an order in but no ETA.

 

[gcmak]

All set, dropped on Eibach springs.
View attachment 531365


View attachment 531366

Haha that escalated quickly. Looks great. I think that's really quite the perfect stance.

 

[Organa]

More pics. Brixton RF7. Photos by Mike @thecleanteslaView attachment 431840 View attachment 431839 View attachment 431841 View attachment 431838 View attachment 431836 View attachment 431837

What lug nuts are you using here?

 

[Mr X]

All set, dropped on Eibach springs.
View attachment 531365


View attachment 531366

Super sexy

View attachment 529820 View attachment 529817 View attachment 529819 Signature wheels
19x9.5
Staggered offset 35/28
Michelin PS4S
Lowered on MPP hybrid coil overs

View attachment 529815

T-Sportline Executive spoiler?

 

[tripleJs15]

What size tires are you running ?

 

[Red Rocket IV]

Sport line spoiler, yes.

Tires are 265/35

 

[cochran]

HRE FF01 Liquid Silver

20x9.5 +35 255/30/20
20x10.5 +45 275/30/20

Tires: Michelin 4s
Suspension: Eibach springs

View attachment 524961

View attachment 524962

how much range loss with these?

 

[XLR82XS]

Haha that escalated quickly. Looks great. I think that's really quite the perfect stance.

It is. I have Eibach pro and it really is the perfect height for us non-track junkies. H&R springs will also provide similar aesthetic.

 

[Organa]

i just bought project kic iconix, i like them alot

Nice! Which set did you go with?

 

[tripleJs15]

Sport line spoiler, yes.

Tires are 265/35

Are you running a square setup ? What offset are they ,

 

[Red Rocket IV]

Staggered offset but same size tires all around

 

[P-Lo801]

I have new wheels coming that are 19x9 et35. I want to use a spacer for the rears to make them look more flushed, so i'm aiming for a 5mm one. It's my understanding that i'll need one that's hub centric, so would these work:

Ichiba Wheel Spacers Ver 1 (5mm) - 5x114.3 / 12x1.5 / 64.1

I think the tesla thread size is 14x1.5, so i'm assuming no. Any other recommendations on where I can find spacers?

 

[tripleJs15]

I have new wheels coming that are 19x9 et35. I want to use a spacer for the rears to make them look more flushed, so i'm aiming for a 5mm one. It's my understanding that i'll need one that's hub centric, so would these work:

Ichiba Wheel Spacers Ver 1 (5mm) - 5x114.3 / 12x1.5 / 64.1

I think the tesla thread size is 14x1.5, so i'm assuming no. Any other recommendations on where I can find spacers?

I'm thinking about doing the same - but is extended studs required with only 5mm ?