Aftermarket Wheels on Model 3

[P-Lo801]

I'm thinking about doing the same - but is extended studs required with only 5mm ?

You'll need bolt-on spacers for anything larger than 5mm in order for there to be enough thread for the lugs.

 

[tripleJs15]

You'll need bolt-on spacers for anything larger than 5mm in order for there to be enough thread for the lugs.

So 5mm is safe without extending ?

 

[P-Lo801]

So 5mm is safe without extending ?

That's my understanding based on what I researched. Perhaps someone more knowledgeable can chime in.

 

[skrtskrt]

All set, dropped on Eibach springs.
View attachment 531365


View attachment 531366

The wheels look great, I just can't justify $5.5k for those. Wish you can get them separately without the other track stuff that comes with it.

 

[skrtskrt]

What's everybody's thoughts on these wheels? They are Zito Wheels ZF05 flow formed. I love 5 Spoke wheels and was debating on getting Tesla's Zero-G wheels, VS Forged VS02 or VS08.

These pics below has some nice concave poke to them IMO. Debating on pulling the trigger!

 

[skrtskrt]

Can anybody photoshop this on a White Tesla Model 3 Performance for me please?!

 

[tripleJs15]

What's everybody's thoughts on these wheels? They are Zito Wheels ZF05 flow formed. I love 5 Spoke wheels and was debating on getting Tesla's Zero-G wheels, VS Forged VS02 or VS08.

These pics below has some nice concave poke to them IMO. Debating on pulling the trigger!

I like them, Roahana and Vorsteiner has similar but not exact.

 

[Cipe]

What's everybody's thoughts on these wheels? They are Zito Wheels ZF05 flow formed. I love 5 Spoke wheels and was debating on getting Tesla's Zero-G wheels, VS Forged VS02 or VS08.

These pics below has some nice concave poke to them IMO. Debating on pulling the trigger!

I’m a big fan of concave wheels and think those look really good. The only thing I would worry about would be the concave profile on a smaller width wheel. The car in the picture is wider than a stock 3 so you would most likely end up with more narrow wheels that are not as concave as these. Is there a photo of them on a standard 3?

 

[skrtskrt]

I’m a big fan of concave wheels and think those look really good. The only thing I would worry about would be the concave profile on a smaller width wheel. The car in the picture is wider than a stock 3 so you would most likely end up with more narrow wheels that are not as concave as these. Is there a photo of them on a standard 3?

Yeah those are my worries as well. I found other ones but they were all in black and didn't show much pop to them.
I guess the question is: without a wide body would these wheels still look good on a regular model 3?

 

[GetYourWheels]

What's everybody's thoughts on these wheels? They are Zito Wheels ZF05 flow formed. I love 5 Spoke wheels and was debating on getting Tesla's Zero-G wheels, VS Forged VS02 or VS08.

These pics below has some nice concave poke to them IMO. Debating on pulling the trigger!

Keep in mind that Tesla in the photos has widebody fender flares, so the fitment hes running wouldnt necessarily be the same as what you'd run on a Model 3 with stock fenders, so the wheels would likely look different in the fitment for a standard Model 3

 

[skrtskrt]

Keep in mind that Tesla in the photos has widebody fender flares, so the fitment hes running wouldnt necessarily be the same as what you'd run on a Model 3 with stock fenders, so the wheels would likely look different in the fitment for a standard Model 3

Hmm, do you have any contrast pics so I could get some perspective?

 

[Organa]

Will 12 x 1.50 lug nuts work on the model 3? Or do I have to stick with 14 x 1.50?

 

[Firehuntah]

Will 12 x 1.50 lug nuts work on the model 3? Or do I have to stick with 14 x 1.50?

The wheel studs are 14 x 1.50 so you can only fit 14 x 1.50.

 

[BR666T]

Fast Wheels FC-04 19x8.5 ET35. Cheap and light (20.4 lbs).

 

[GetYourWheels]

Hmm, do you have any contrast pics so I could get some perspective?

We dont carry the Zitos so I dont sorry, but the standard Model 3 fitment will be a higher offset and less concave than the widebody fitment I believe.

 

[derichio02]

Mounted staggered Titan7 T-S5 Technica Bronze wheels. Stock P3D suspension. View attachment 515614 View attachment 515615 View attachment 515616 View attachment 515617 View attachment 515618 View attachment 515619 View attachment 515620 View attachment 515622 View attachment 515625

Titan and T-Sportline M3115 look very similar. Are they the supplier?

 

[gcmak]

Titan and T-Sportline M3115 look very similar. Are they the supplier?

No I don't believe they are the supplier - but I don't have the official intel. If they are, then T-Sportline is making a decent profit.

 

[pbd87]

The wheels look great, I just can't justify $5.5k for those. Wish you can get them separately without the other track stuff that comes with it.

People are now starting to receive them as the referral reward from the old program, and I've seen a set posted for sale already in a facebook group. There will be purchase options, I think. I think the set I saw was posted for 2600, but I couldn't find it right now to confirm.

 

[skrtskrt]

People are now starting to receive them as the referral reward from the old program, and I've seen a set posted for sale already in a facebook group. There will be purchase options, I think. I think the set I saw was posted for 2600, but I couldn't find it right now to confirm.

For some reason it looked better in the track mode V2 videos. Going to pass on them

 

[N54TT]

I’ve posted this set a while ago...but a bump for another season running them lol