Model S Aftermarket Wheel Fitment/Offset Discussion

[MODEL+]

21" BC Forged EH185

Our client Jonathan first reached out referencing this Audi RS6 with BC Forged EH185s.

Of course, the wheels and tire spec was in a different world for the Model S. But that's not a problem due to the bespoke nature of ordering BC Forged wheels. We finalized on a staggered 21x9.5 & 21x10.5 setup and this is the outcome for Jonathan's MSLR! Enjoy

The color, fitment and concave profile paired with a moderate drop via lowering links is absolutely menacing!

BC Forged Bespoke Wheel Program - Model S

Bespoke Configuration - Diameter, width, offset, color, and face profile are completely customizable. Constructions & Designs (choose a design) Monoblock - 1 piece 6061-T6 Forged Aluminum Modular - 1 piece 6061 Forged Center + 1 piece 6061 Forged Barrel + Stainless Assembly Hardware. Plug &...

modelplusstudio.com

Please message or email us at [email protected] for any questions or ordering details!


Danny

 

[brooklyn]

RS6 has been my dream car as an Audi enthusiast for decades now. Was a close call between getting one and the MSP. In the end MSP availability and better deals won the day but man that thing looks wicked.

 

[Janika]

I'm on factory air with lowering links. I have them set to be pretty low in Standard mode and thanks to Tinkla Buddy I can set the car to very low when parked.

And my car is not meant to be legal so I'm not so worried about what's allowed and not

Hey,

Could you explain what is Tinkla Buddy and what kind of features/possibilities that thing have?

Thank you

 

[VegarHenriksen]

Hey,

Could you explain what is Tinkla Buddy and what kind of features/possibilities that thing have?

Thank you

TINKLA - Tinkering with Tesla

tinkla.us

Tinkla Buddy - Tinkla: Tinkering with Tesla

tinkla.us

 

[Janika]

P85D

I have been searching this fitment thing quite a lot and I will probably order concaver forged wheels:

21x9,5 ET27 245/35
21x10,5 ET35 285/30

I am pretty sure this will be flush/flush fitment without rubbing, what you guys think?

 

[MODEL+]

P85D

I have been searching this fitment thing quite a lot and I will probably order concaver forged wheels:

21x9,5 ET27 245/35
21x10,5 ET35 285/30

I am pretty sure this will be flush/flush fitment without rubbing, what you guys think?

Yes, this is pretty good.
Could push a little further on offset if you're planning to lower your S.

Feel free to message us if you have any further questions! We tailor to clients worldwide.


Danny

 

[Thurro!]

20x9 +28 245/40/20 Falken FK510 -1.5 Camber
20x11 +32 265/35/20 Falken FK510 -1 Camber

Wheels Forgestar CF10

Do you have any back on shots (looking from the back forward)?

 

[colindo1990]

Do you have any back on shots (looking from the back forward)?

 

[XRPOG]

Thanks for all the advice everyone.i ended up getting Ferrada Fr3 in size 20x9 245/40/20 up front and 20x10.5 275/35/20 in the rear. No rubbing and drives amazing.

What model Yr & spec is your MS? I just ordered 20x9's for all 4 corners with 245/40's (tires) hoping the 9" wide wheel will fit. Will be running thin spacers aswell to prevent any rubbing. Hope this size wheel size fits.. Mines a 2019 100D.

 

[gingerbeer]

Of course, the wheels and tire spec was in a different world for the Model S. But that's not a problem due to the bespoke nature of ordering BC Forged wheels. We finalized on a staggered 21x9.5 & 21x10.5 setup and this is the outcome for Jonathan's MSLR! Enjoy

Danny

Hi Danny. What was the offsets that you went with on these please

 

[MODEL+]

Hi Danny. What was the offsets that you went with on these please

Hello @gingerbeer ,

Final specs were 21x9.5 +22 / 21x10.5 +28.


-Danny

 

[gingerbeer]

Hello @gingerbeer ,

Final specs were 21x9.5 +22 / 21x10.5 +28.


-Danny

Thanks Danny,

I've got a 2014 P85+. Is this MSLR one of the older ones so thats a valid reference point, or amore recent plaid/similar with the different track and suspension?

 

[Mohamed Gobara]

Hey guys, question for you.

I have a guy locally selling some forged wheels.

Would 21x11.5, ET38 fit in the rear without spacers??

Calculator shows that it will sit about 11mm closer to the suspension.

*FYI: the fronts are 21x10, ET40

 

[colindo1990]

fronts will work with 15mm spacers but the rears are too wide for rears unless you have the refreshed model S

 

[Mohamed Gobara]

fronts will work with 15mm spacers but the rears are too wide for rears unless you have the refreshed model S

Sorry forgot to mention.

2022 MSLR

 

[MikloVL]

Thanks Danny,

I've got a 2014 P85+. Is this MSLR one of the older ones so thats a valid reference point, or amore recent plaid/similar with the different track and suspension?

Updated tail lights so its the most recent mslr

 

[colindo1990]

Sorry forgot to mention.

2022 MSLR

fronts will fit but you will need offset 28 rears for inner clearance

 

[MODEL+]

Hey guys, question for you.

I have a guy locally selling some forged wheels.

Would 21x11.5, ET38 fit in the rear without spacers??

Calculator shows that it will sit about 11mm closer to the suspension.

*FYI: the fronts are 21x10, ET40

fronts will work with 15mm spacers but the rears are too wide for rears unless you have the refreshed model S

Sorry forgot to mention.

2022 MSLR

Rear should be fine.
21x11.5 +40 with 325/30/21

Danny

 

[d-lb]

Hello @gingerbeer ,

Final specs were 21x9.5 +22 / 21x10.5 +28.


-Danny

Hey I'm new here also. I have a 2018 model S and wanted to know could use this same wheel set up for my rear? I was advised to go as far as +36 for my offset. Could I have went farther than that? +28 specifically?

 

[MODEL+]

Hey I'm new here also. I have a 2018 model S and wanted to know could use this same wheel set up for my rear? I was advised to go as far as +36 for my offset. Could I have went farther than that? +28 specifically?

On pre-face lifted Model S, +28 is a bit aggressive.
Whoever advise you is correct. 10.5 +35 is about where you want to be.


Danny