Welcome to Tesla Motors Club
Discuss Tesla's Model S, Model 3, Model X, Model Y, Cybertruck, Roadster and More.
Register

Vendor New Product:Thor's Hammer Inspired Charging Cable Mount

This site may earn commission on affiliate links.
Hi guys I wanted to introduce our Charging cable organizer mount inspired by Thor's hammer. We kickstarted this project based on many Tesla owners I talked to (including myself) looking for a alternative to the garden hose holder setups to mount our charging cables. We spent close to 6 months conceptualizing and revising the design to encapsulate the lore of Norse mythology and Tesla's design language into a mount that is functional. Its made out of Aluminum metal and slim mounts effortlessly with a large inlet to hold the entire length of the cable.

Additionally we are offering a a limited run of 50 pieces with Free upgrade to Phosphorescent Glow in Dark strip that runs along the base of the mount.
The product is launching next month so we are quite ahead of schedule. We are also offering 50% off the initial batch along with the free upgrade to the Phosphorescent edition, just hit the link to be notified because it will go out within first few hours of launch.

For all TMC members I'll make sure you guys get the full discount just shoot me a email at [email protected]


glow in dark For first 50 pledges only (1).png

065A0258 white.jpg

065A0305.jpg

Inlet.jpg

065A0370.JPG

giphy.gif
 

Attachments

  • Thor.jpg
    Thor.jpg
    467.3 KB · Views: 67
Last edited:
  • Like
Reactions: Technokrat
Tweak the design a bit & you should have a hit product. Right now, with the garden hose setup most of us have we need to do a balancing act since the cord drops down if the heavy connector goes too far down while wrapping around the cord holder hook. We need something like the J or U hooks we use to hang tools in the garage to hold the charging connector. I will go to Home Depot and see if anything there fits now that your product gave me this idea.
 
Other than looks (which is subjective), what advantage does this product offer to the $6 double “J” hook or garden hose holder?
You know honestly, a garden hose holder will probably work just fine for some (as it did initially for me). But for some of us who paid a premium for a Tesla model want something that goes beyond the generic $6 holder from Home Depot then this is for you. I have some reviewers that have tested the mount and I'll post the videos here shortly when it goes live. The main difference is that you the charger cord is secure when it plugs into the mount. It won't dangle or get caught in the garage door if you have a narrow space like mines. But the feel and look of the mount is something that can't be conveyed in these pictures until...you hold it. Its hard to describe but the main base is made from aluminum so it is hefty and can be held with the cord attached as if you are holding Thor's hammer. We tried to embody the same design language as Tesla by incorporating the God of Thunder elements into this design.
 
After consulting with the engineer team we are able to create a limited run of pieces with the strip that has uses Phosphorescent paint that glows in the dark.
Its a nice effect that offers afterglow for hours and really highlights the design of the hammer. Also its a FREE upgrade limited to the first 50.

The product is launching next month so we are quite ahead of schedule. We are also offering 50% off the initial batch along with the free upgrade to the Phosphorescent edition, just hit the link to be notified because it will go out within first few hours of launch.

For all TMC members I'll make sure you guys get the full discount just shoot me a email at [email protected]

You can also checkout our website here.

Untitled design (34).png
 
Here's a preview of the Mount with luminescence that is achieved by shining direct light onto the groove. It will achieve a glow effect for several minutes that really shines during dim lighting but can be seen during the day too. This limited batch will run 50 pieces because the glow effect was hard to achieve because blue primer and phosphor typically does not mix well but we were able to achieve this through a professional paint factory.
Let me know what you guys think.

 
We are LIVE! After months of hard work we are finally launching on Kickstarter.
Here's a FAQ to answer some questions.

We're also offering SUPER EARLY BIRD pricing up to 50% off and FREE UPGRADE to Luminesecent Light Bar for the mount.
For first time users to Kickstarter make sure to select a Pledge Reward Tier (Basically product) you want and make sure get the Super Early Bird discount.
Jump straight to KICKSTARTER HERE.

FREQUENTLY ASKED QUESTIONS​

1.When will the products ship?​

Production has already been completed so once the campaign has met 100% of its goal you pledge is GUARANTEED to receive your order. The products as of 1/17/2024 is already in transit and ETD is Mid February. We will ship once as soon as it has landed within the 1st week.

2. How easy is it to install?​

Very simple. It just takes 3 screws to mount the wall bracket to the wall. The Hammer slides in securely and can be taken off as well. If you can mount a picture frame then you can do this.

3. Do I have to get the luminescent edition if I pledge the super early bird reward?​

You can always email us if you prefer the standard edition without the luminescent light bar. We can switch it over without issue and you still get the super early bird pricing.

4. How do I contact you and where are you located at?​

You can message us from our social media pages or email us at [email protected]. We are located in California.

Engage2.png
 
Check out our first glowing review of our mount from @the_golden_tesla
Just first day of launch we are already at 20% of our goal!!
Still have a few more left for Super Early Bird Pricing.
Here's our Kickstarter Link


Just to let you know nothing is charged until campaign ends on Feb 16th. When the products will also ship the same week.
comparison.jpg
 
Last edited: