Offset selection for flush fitment

[Bennny]

Need help with offset and size choice.

Advan GT, going on a M3P daily driver. No track or autocross. Car will be on MPP sports coils and lowered to 110mm ground clearance.

Can’t decide on 18x9.5 with 265/40 PS4S, or 19x9.5 with 265/35 PS4S.

Also can’t decide on +29 or +38. Want flush fitment with no poke ideally.

All pics and advice appreciated, cheers!

 

[FauxOperator]

I would 100% go with 19's.

A fellow forum member is running a 9.5" wheel with +33 in the front and +22 in the rear and states they are very flush on coilovers.

Due to the shape of the car, you'll need to run a lower offset in the rear than the front to be flush so you'd need to go with a staggered setup.

 

[Bennny]

I would 100% go with 19's.

A fellow forum member is running a 9.5" wheel with +33 in the front and +22 in the rear and states they are very flush on coilovers.

Due to the shape of the car, you'll need to run a lower offset in the rear than the front to be flush so you'd need to go with a staggered setup.

Thanks mate. I gathered that. Decided to run Advan GT 19x9.5+29 square setup, better handling even though the rear isn’t flush. Cheers