Pic of your Model 3.......RIGHT NOW! [model 3 pictures thread]

[tttt]

 

[pdx_m3s]

So excited!View attachment 891110View attachment 891111View attachment 891112

@santua here’s a couple more of the diffuser

View attachment 891113View attachment 891114

Well done sir. Well done.

 

[El joe]

 

[Migs671]

Just upgrade to coilovers and swaybars

What coil overs did you go with?

 

[santua]

So excited!View attachment 891110View attachment 891111View attachment 891112

@santua here’s a couple more of the diffuser

View attachment 891113View attachment 891114

Damn dude, that looks absolutely stunning! You can't go wrong with TEs and the fitment looks better than what I have seen on other TE Model 3s. Any use of spacers?

 

[canasion35]

Damn dude, that looks absolutely stunning! You can't go wrong with TEs and the fitment looks better than what I have seen on other TE Model 3s. Any use of spacers?

Thank you very much sir! If i remember correctly the non-performance M3's have ~5MM extra negative offset due to the rotor hats being a little thicker so that may be why the fitment is a little more flush! The PS4S' run a little wider than most as well.

 

[Roentgen_18]

So excited!View attachment 891110View attachment 891111View attachment 891112

@santua here’s a couple more of the diffuser

View attachment 891113View attachment 891114

Great job with the mods! The car looks phenomenal!

 

[canasion35]

Great job with the mods! The car looks phenomenal!

Thank you very much! I can’t wait to see how yours ends up sitting after the spring install!

 

[daredeezy]

So excited!View attachment 891110View attachment 891111View attachment 891112

@santua here’s a couple more of the diffuser

View attachment 891113View attachment 891114

Is that Aerofabb diffuser? And what specs are your wheels?

 

[daredeezy]

So excited!View attachment 891110View attachment 891111View attachment 891112

@santua here’s a couple more of the diffuser

View attachment 891113View attachment 891114

Is that an Aerofabb diffuser? And what specs are your wheels?

So excited!View attachment 891110View attachment 891111View attachment 891112

@santua here’s a couple more of the diffuser

View attachment 891113View attachment 891114

What are your wheel specs?

 

[canasion35]

Is that an Aerofabb diffuser? And what specs are your wheels?

What are your wheel specs?

Maxton V2 diffuser - 19x9.5 +28 square on the wheels

 

[E.Potter]

sweet

 

[BadassBob]

What coil overs did you go with?

BC's but the V1s set on full soft. they are way better then stock suspension.

 

[Clun9]

BC's but the V1s set on full soft. they are way better then stock suspension.

BC Racing I don't think offers the V1 outside of Australia or the UK.
We have the BR-Series and or the extreme low version as their base coilover.

 

[BadassBob]

BC Racing I don't think offers the V1 outside of Australia or the UK.
We have the BR-Series and or the extreme low version as their base coilover.

I'm not tracking my car so honestly didnt need the BR series, they were only an extra $200 but i didnt need them so just got V1s and spent the extra on swaybars which were very worth it.

 

[HBM3]

New to the forums, picked up Long range model a month ago.

 

[alee56]

Maxton V2 diffuser - 19x9.5 +28 square on the wheels

Ive just received my diffuser did you just use the provided screws and 3m tape to install, massive piece to hold on for screws and 3m?

 

[canasion35]

Ive just received my diffuser did you just use the provided screws and 3m tape to install, massive piece to hold on for screws and 3m?

Yeah i used everything it came with, and I added more 3m tape pretty much everywhere the diffuser touches the body. I also got more self tapping screws and put a row of 3 screws along each fin and at the front. I can snag a picture after work to show you.

 

[alee56]

Yeah i used everything it came with, and I added more 3m tape pretty much everywhere the diffuser touches the body. I also got more self tapping screws and put a row of 3 screws along each fin and at the front. I can snag a picture after work to show you.

That would be wonderful thank you. Can't wait to install it

 

[windnsea26]

Just picked this up for my wife 12/30/22. Super impressed with the car so far.