Hi, I just picked up my 2021 Tesla Model 3 SR+ from the PPF installer, and Im not sure if this is what I should be expecting. Im not satisfied with this installation.
Is this normal? The shop said that the bubbles will go away on their own after a while. Should I require them to redo?
![](https://i.ibb.co/VpZH9gB/IMG-3414.jpg)
Hood near the passenger A pillar
![](https://i.ibb.co/5vNFHHH/IMG-3415.jpg)
Passenger Side Fender near camera
![](https://i.ibb.co/jvzgSLm/IMG-3416.jpg)
Big gap of PPF on passenger side front bumper (same on driver’s side)
![](https://i.ibb.co/J71DnmX/IMG-3417.jpg)
Bubbles under the lip of the front bumper
![](https://i.ibb.co/hdNdsJh/IMG-3418.jpg)
Front hood near driver’s side
![](https://i.ibb.co/FWH6p9p/IMG-3419.jpg)
Front bumper sensors (all have bubbles
![](https://i.ibb.co/t4FJyHt/IMG-3420.jpg)
![](https://i.ibb.co/GWJ4h00/IMG-3421.jpg)
![](https://i.ibb.co/2WQ4y8V/IMG-3422.jpg)
Mirror
![](https://i.ibb.co/rk5xL61/IMG-3423.jpg)
Side sensor with fold
![](https://i.ibb.co/tY7bk72/IMG-3424.jpg)
Hood lid not property affixed and bunched up under hood
![](https://i.ibb.co/37C9spX/IMG-3425.jpg)
PPF on the bumper stops way before the hood. Seems like a lot of exposed paint
![](https://i.ibb.co/vHnK47r/IMG-3426.jpg)
Hood bubbles
![](https://i.ibb.co/4sg6zhB/IMG-3427.jpg)
Trapped dirt on driver’s side fender near camera
![](https://i.ibb.co/dfmGd3g/IMG-3428.jpg)
Scratch in paint near driver’s side fender camera
![](https://i.ibb.co/C9tFWZG/IMG-3429.jpg)
Mirror cut is not cut straight and far from the edges
![](https://i.ibb.co/f15w5Pg/IMG-3430.jpg)
Hood near the A pillars are missing a corner of PPF (both sides)
![](https://i.ibb.co/nkZSVyG/IMG-3431.jpg)
Fold in PPF on mirror
Is this normal? The shop said that the bubbles will go away on their own after a while. Should I require them to redo?
![](https://i.ibb.co/VpZH9gB/IMG-3414.jpg)
Hood near the passenger A pillar
![](https://i.ibb.co/5vNFHHH/IMG-3415.jpg)
Passenger Side Fender near camera
![](https://i.ibb.co/jvzgSLm/IMG-3416.jpg)
Big gap of PPF on passenger side front bumper (same on driver’s side)
![](https://i.ibb.co/J71DnmX/IMG-3417.jpg)
Bubbles under the lip of the front bumper
![](https://i.ibb.co/hdNdsJh/IMG-3418.jpg)
Front hood near driver’s side
![](https://i.ibb.co/FWH6p9p/IMG-3419.jpg)
Front bumper sensors (all have bubbles
![](https://i.ibb.co/t4FJyHt/IMG-3420.jpg)
![](https://i.ibb.co/GWJ4h00/IMG-3421.jpg)
![](https://i.ibb.co/2WQ4y8V/IMG-3422.jpg)
Mirror
![](https://i.ibb.co/rk5xL61/IMG-3423.jpg)
Side sensor with fold
![](https://i.ibb.co/tY7bk72/IMG-3424.jpg)
Hood lid not property affixed and bunched up under hood
![](https://i.ibb.co/37C9spX/IMG-3425.jpg)
PPF on the bumper stops way before the hood. Seems like a lot of exposed paint
![](https://i.ibb.co/vHnK47r/IMG-3426.jpg)
Hood bubbles
![](https://i.ibb.co/4sg6zhB/IMG-3427.jpg)
Trapped dirt on driver’s side fender near camera
![](https://i.ibb.co/dfmGd3g/IMG-3428.jpg)
Scratch in paint near driver’s side fender camera
![](https://i.ibb.co/C9tFWZG/IMG-3429.jpg)
Mirror cut is not cut straight and far from the edges
![](https://i.ibb.co/f15w5Pg/IMG-3430.jpg)
Hood near the A pillars are missing a corner of PPF (both sides)
![](https://i.ibb.co/nkZSVyG/IMG-3431.jpg)
Fold in PPF on mirror