You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
@cgell Maybe, but I have had 44.6 on the Plaid for some time. I doubt the holiday package was ready back then.It could be that the features are included, but have to be unlocked. Seems like the best way to give everyone the update at around the same time. NotaTeslaApp says that the holiday update is 44.25
The holiday package sounds cool and I am looking forward to it, but I was really just looking forward to the defrost working without turning the heat on full blast. After updating it still blasts and I can’t adjust without the defrost turning off. At least Tidal works - and sounds way better than Spotify.@cgell Maybe, but I have had 44.6 on the Plaid for some time. I doubt the holiday package was ready back then.
Mine finally updated to 2021.44.6 this morning.I received my Y in June 2021 and I am still on 2021.36.8
Just got 2021.44.6 this morning. Waypoints are great, but the exterior voice thing failed to freak out a friend of mine walking up to the house, had high hopes for that.I have a October build MYP (VIN 266) that seems stuck on 2021.36.8. 2021.40.5 has been out for weeks and recently 2021.44.5 released, yet no updates. I am not on factory hold firmware and have received OTA updates in the past. Anyone else in this situation?
I hadn’t noticed an exterior voice option. I did see music controls in the app. Will double check.Just got 2021.44.6 this morning. Waypoints are great, but the exterior voice thing failed to freak out a friend of mine walking up to the house, had high hopes for that.
2.5 months since last update.
Yes, it's the Darth Vadar voice with Sentry (in the app)I hadn’t noticed an exterior voice option. I did see music controls in the app. Will double check.
I hadn’t noticed an exterior voice option. I did see music controls in the app. Will double check.
I am in the 2% as well then haha, feeling special.2.5 months on 36.5.5, which teslafi shows as 2% of fleet.
So I give it a couple weeks and say I'm stuck?
IDK, car drives great, more phantom braking on I 90 clear days no shadows than I'd like. (2x per hour). Late afternoon shadows, maybe 5x per mile.
So, what to do? Nothing for now I guess.
I am in the 2% as well then haha, feeling special.
I don't think the whole regional software release thing is true(I could be wrong) but I have two Y's in my garage both Vision only, and below are my versions.
21 MYLR stuck on 36.5.5
22 MYP had three updates since delivered few weeks ago, and this morning 44.6
My two centsFor the first time, my October 2021 MYLR said that an update was available! So it started the update process from 2021.35.102 to 2021.44.6 yesterday morning. However, it is still only about 10% finished with the download (based on the little green progress bar). It seemed to stop when the car goes to sleep. If I sit in the car and keep it awake for an hour, the progress bar will move a couple of pixels. The manual says to make sure that the A/C is not ON, DOG, nor CAMP, so I did that. A couple of hours ago I turned on Sentry Mode since I know that keeps the car awake but it didn't seem to help.
At this point, it is at 10%, the rate says 1.3 MB/s, and progress is slow. I may just have to sit in the car for 6-8 hours to hurry it along. Does anyone know a way to get the green progress bar to keep moving? Or in the very least how to tell it to do the update WITHOUT using WiFi. The cell connection is faster...
Thanks,
Scott
PS yes, I live in the country and have lousy internet. Dishy just arrived two days ago, but I'm still waiting for the ethernet adapter to arrive before I can install it.
--
MYLR | Red ext | White int | 19" | 5 seats | tow | no FSD | made/delivered Oct 2021
You need to use wifi to download the update. If you don’t have wifi access you can use your phone as a hotspot and connect to it. You can not use the car’s LTE connection.For the first time, my October 2021 MYLR said that an update was available! So it started the update process from 2021.35.102 to 2021.44.6 yesterday morning. However, it is still only about 10% finished with the download (based on the little green progress bar). It seemed to stop when the car goes to sleep. If I sit in the car and keep it awake for an hour, the progress bar will move a couple of pixels. The manual says to make sure that the A/C is not ON, DOG, nor CAMP, so I did that. A couple of hours ago I turned on Sentry Mode since I know that keeps the car awake but it didn't seem to help.
At this point, it is at 10%, the rate says 1.3 MB/s, and progress is slow. I may just have to sit in the car for 6-8 hours to hurry it along. Does anyone know a way to get the green progress bar to keep moving? Or in the very least how to tell it to do the update WITHOUT using WiFi. The cell connection is faster...
Thanks,
Scott
PS yes, I live in the country and have lousy internet. Dishy just arrived two days ago, but I'm still waiting for the ethernet adapter to arrive before I can install it.
--
MYLR | Red ext | White int | 19" | 5 seats | tow | no FSD | made/delivered Oct 2021
took me about 30 minutes (??? more or less) to down load this morning at 450 MB/s. My wifi cut off for some reason half way through, so I connected to the hot spot on my phone to finish it.Yes, I already have Sentry Mode on (for the past 4 hours) and WiFi is on. My home just has crummy internet. Perhaps I need to drive to StarBucks and use their WiFi? How large is this update?
At this point, I'm about at 15% progress.
Scott
--
MYLR | Red ext | White int | 19" | 5 seats | tow | no FSD | made/delivered Oct 2021
Are you sure about those numbers? 450 MB/s * 1800 seconds = 810 GB. But the fastest WiFi, 802.11ac, tops out at 433 Mbps.took me about 30 minutes (??? more or less) to down load this morning at 450 MB/s. My wifi cut off for some reason half way through, so I connected to the hot spot on my phone to finish it.