I attempted to swap the black seats out of my 2023 MYP (prod 12/22) with my wife’s 2023 MYLR (prod 8/23) white seats. Though very labor intensive (job took nearly 2 hours, every bolt, clip, plug, and plastic retainer was identical. Disconnect the 16v low voltage battery and shut off the high voltage battery from the “safety” menu and you’re in business.
The fitment, physically, was the same. However, the the problem was after reattaching the battery turning the car back on. Both vehicles generated a fault within the “RCM” or restraint control module - picture attached. After some sussing, I determine that the fault was specifically related to a firmware mismatch between the car’s RCM and side bolster airbags firmware in the front seats. When I switched the seats back, the faults/errors were gone and all was back to normal.
Has anyone had experience with this? I scoured the this forum, google and YouTube. Nothing related on this topic or process for updating firmware.
Any useful insight is appreciated.
Cheers,
The fitment, physically, was the same. However, the the problem was after reattaching the battery turning the car back on. Both vehicles generated a fault within the “RCM” or restraint control module - picture attached. After some sussing, I determine that the fault was specifically related to a firmware mismatch between the car’s RCM and side bolster airbags firmware in the front seats. When I switched the seats back, the faults/errors were gone and all was back to normal.
Has anyone had experience with this? I scoured the this forum, google and YouTube. Nothing related on this topic or process for updating firmware.
Any useful insight is appreciated.
Cheers,