Big thanks to
@SD_Engnr for figuring out KLC180-295 and KLC102 are the proper links for P3.
View attachment 435037
Bright YELLOW bits.
View attachment 435023
Adjusting the length to 3mm longer than stock. This will get readjusted during corner balancing.
View attachment 435033
Use Whiteline supplied washers on each side of the sway bar mounting hole.
View attachment 435034
AnotheTesla idosynchrosy. Both of the Whiteline endlinks (F/12mm and R/10mm bolt size) and Tesla rear (10mm) have fine pitch thread. Tesla front (12mm) has coarse thread. Luckily, Whiteline comes with locknut for the endlinks.
View attachment 435028
Front
View attachment 435039
Rear