Not true. There's 2 spanners. A smaller one and a bigger one but we will use a punch to get them to lock up on all perches. We only use the spanners to adjust the height in the front. I find it easier to just pull the whole perch out rather than trying to wrestle with it. half inch means you probably need to drop that spring about 8mm but do share what size tires you're going with because that may change things as well since you have spacers too.
This is the lowest setting on the Teins on my model Y btw. Keep in mind I have a short tire on this 285/35/20 with 20x10.5
View attachment 903470I
Not true. There's 2 spanners. A smaller one and a bigger one but we will use a punch to get them to lock up on all perches. We only use the spanners to adjust the height in the front. I find it easier to just pull the whole perch out rather than trying to wrestle with it. half inch means you probably need to drop that spring about 8mm but do share what size tires you're going with because that may change things as well since you have spacers too.
This is the lowest setting on the Teins on my model Y btw. Keep in mind I have a short tire on this 285/35/20 with 20x10.5
View attachment 903470
I had no idea it came with two different sizes...i have two of the same size spanner wrenches that came with my kit. No wonder it kept slipping then.