Trunk auto open manually stopped and now won’t open.

[TheHairyOne]

Super annoying when walking by in garage. Manually stopped it from opening, then pressed close button and it closed. But now it won’t go up. Manually lifting it up works, and closing by button press works. Tried 3 second hold at top position and heard numerous beeps. Still didn’t open after that. Takes a bit of force to lift, more than before. Seems like something is broken, but not sure if I did the calibration right and assume if it closes via the motor that it should be able to open via the motors.

Any thoughts? How many times should it beep for the confirmation of calibration?

Thanks

 

[DerbyDave]

In the manual:
Adjusting Liftgate Opening Height
If Model S is equipped with a powered liftgate,
you can adjust its opening height to make it
easier to reach or to avoid low-hanging
ceilings or objects (for example, a garage door
or light):
1. Open the liftgate, then manually lower or
raise it to the desired opening height.
2. Press and hold the button on the
underside of the liftgate for two seconds
until you hear a confirmation chime.
3. Confirm that you have set it to the desired
height by closing the liftgate, then
reopening it.