V3 just finished adding 2 more batteries, so I now have 7. Still no grid charging working. And I now have more disconnects. So next step,
final from the inspector, then PGE.
final from the inspector, then PGE.
You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
Looks like a car can be driven through there and some bollards are needed.V3 just finished adding 2 more batteries, so I now have 7. Still no grid charging working. And I now have more disconnects. So next step,
final from the inspector, then PGE.
If not a car, definitely a motorcycle.Looks like a car can be driven through there and some bollards are needed.
They still need to update to a new placard before inspection. Yep, will see what the inspection does. The inspector has been going to my house for 5Love to see a whole lot of batteries there!
Hope your inspection goes smooth, looks like those Eaton units should be labeled as well, its not clear to me what they do, but as long as you have a good clear placard that tells you what to do to shut it down if the house is on fire.
You are going to give @holeydonut a giant AC Disco-stiffy with these pictures, I love it!
we shall seethe use of eaton instead of square D disconnects is unsettling.
I bet he’ll fail the 7-handed rule and they’ll force all his Powerwalls through 2 mega fatty 200a disconnects.
Wow, must be nice to be rich!! I tried to get Sunrun to switch the IQ7 inverters for IQ7+s because I'm not getting the full power capabilities out of my system, (6.7Kw peak instead of 7.5Kw peak), and they said my contract limits me to 58% offset and if I wanted the upgrade I had to pay for them to do it. Approximately 7500 installed!!V3 just finished adding 2 more batteries, so I now have 7. Still no grid charging working. And I now have more disconnects. So next step,
final from the inspector, then PGE.
View attachment 867532View attachment 867533View attachment 867534
Yes, I had to pay way too much for the batteries, since I had to stay with same company. But I get 30% back.Wow, must be nice to be rich!! I tried to get Sunrun to switch the IQ7 inverters for IQ7+s because I'm not getting the full power capabilities out of my system, (6.7Kw peak instead of 7.5Kw peak), and they said my contract limits me to 58% offset and if I wanted the upgrade I had to pay for them to do it. Approximately 7500 installed!!
I'm laughing because the fire Marshall has dealt me other hypotheticals in the past, like having more than 10lbs of sugar on site being a fire hazard ("but what about the Holey Donuts shop down the street?" "That's a bakery. You aren't, so 10lbs of sugar is an explosion hazard."If not a car, definitely a motorcycle.
The marshal over at SCC fire made sure to point that out to me as the reason the bollards needed to be no more than 4 feet apart, instead of 5 feet.
I do agree that this one disconnect per battery is just nuts!You should invite over the local fire house for a BBQ and make sure they know how to do the switch-throw shuffle
Not anymore. he shows an empty bank account after all the stuff he has in in sig line.Wow, must be nice to be rich!! ...
Yes, but you'd have to also add another 20A breaker as the IQ7+ allows only 13 panels while the IQ7 can handle 16, Really the same result, more or less.Wow, must be nice to be rich!! I tried to get Sunrun to switch the IQ7 inverters for IQ7+s because I'm not getting the full power capabilities out of my system, (6.7Kw peak instead of 7.5Kw peak), and they said my contract limits me to 58% offset and if I wanted the upgrade I had to pay for them to do it. Approximately 7500 installed!!
Don't see why would have to add another breaker. I have a total of 27 panels going into the combiner, then going to the Gateway.Yes, but you'd have to also add another 20A breaker as the IQ7+ allows only 13 panels while the IQ7 can handle 16, Really the same result, more or less.
Unless Enphase has an upgraded wire like 10Ga to a 30A breaker, the 12 Ga that I know of to the 20A breaker is limited to 13 IQ7+ inverters per 20A breaker.Don't see why would have to add another breaker. I have a total of 27 panels going into the combiner, then going to the Gateway.