You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
No dice, tried it 2 times,no road lines or speed limits.
Fixed! (At least I think it is!)
Here's what I did if you'd like to give it a try!
On centre screen turn headlights to 'Off'
Driver assistance - turn everything to 'Off'
E-Brake - 'Power Off' the vehicle
Wait 1 minute
Press Footbrake to 'Power On'
Driver assistance - turn everything to 'On'
Headlights - switch to 'Auto'
That's it!
I repeated this twice as I didn't notice that it fixed it first time around so if once doesn't do the job try it again!
The clue that it had worked was that my location Speed Limit sign appeared in the driver display ( this had disappeared along with TACC and Autosteer)
I have a 100 mile motorway drive today and will post if everything works OK.
Good luck!
Ouch! Sorry to hear that.
I'm at 17.11.3 since Wed.What firmware have you updated ? Is it 17.11.10? I got the exactly same issue after I update from 17.11.3 to 17.11.10 last Sat. Called and scheduled an service appointment this Thursday. I highly suspect it is something wrong in the latest firmware.
When I called. They told me they will look at the log first to see if there is some hints and call me back.
But they also have a service appointment scheduled in case I do need to bring it in.
I suggested if you don't heard anything back in 24 hours, call again and ask for a service appointment.
Did you reset the IC (Hold the upper buttons on either side of the wheel)? Drive long enough to assume it's not just recalibrating?
Well, it worked fine while it lasted. 50mile motorway trip yesterday and everything worked great, for the return I had to reboot the screen due to 'touchscreen unresponsive ' message and everything has disappeared again. I'll report back what the SC say about the problem.
That's the same symptoms I have (17.11.3). I forgot to mention I never get speed limit sign in another post here Firmware 8.1 - Autopilot HW2 , and I had separately noticed the headlights always staying on and forgot to consider correlating it with this problem; obviously, that would be related. I find it odd, too, since I keep my cameras pretty clean.Judging by this thread, the problem (lights on all the time, no speed limit icon, no TACC icon, no autosteer icon, no driver-assist functions) is clearly not simultaneous coincident hardware failure. I shall contact the SC on Monday with the information presented here.
Welcome back! In my case, since I don't have Enhanced or Self, but do have Regular Assistance in my AP2 car, it is what I have come to expect from the Regular level that is now missing. I never got the "Cruise Not Available"; I can still use manual cruise control, as before, in my non-Enhanced, and I think "Cruise Not Available" is something that happens to those with Enhanced and Self. By the way, I think that failure mode is dumb: it ought to allow manual cruise control, rather than none at all.Is anyone else with AP2 on 8.1 (Model S) experiencing "Cruise Not Available"?
So I got the 17.11.10 update this morning, Auto Steer didn't work until this afternoon. It was great! Then tried again tonight and no dice it wasn't working again no cruise no lines on dash. Hope the get software fix soon. My closest server center is over 300 miles away.
Do we have any solution yet? I have model x 100d, took delivery right on the day 8.1 was released. Autopilot is not working right after 8.1. I thought it may need more miles to calibrate, now I have driven 300miles+ but still not working.