You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
did not order with FSDThanks for the info. Seems like Tesla still hasn't run out of their stock of 2.5 computers. As far as I can tell, all SR/+ vehicles now are not shipping with HW3.
Did you order your SR+ with FSD?
I will try to check my part # today and report back.I took delivery of my SR+ on 7/30. Build date 7/2019. Same exact firmware history as you. Factory installed firmware was 2019.15.105 46b3032. Received update to 2019.28.2 320fba0 a few days ago. No FSD.
To my surprise, my video is H264, but I am going to go on a hunch that Tesla made a change with 2019.28.2
I saw a few other threads where owners who took delivery with specs similar to ours checked their actual HW behind the glove box, confirmed HW3 via part number, and have H264 encoding.
I could be wrong...
Well, I guess there goes the simple way to check HW3 or not...
For now. I have trouble believing it'll stay that way forever - if they never intend to use it, why build the hardware for H265 into the HW3 chips?
I don't understand why they did this (unless it was a mistake?) but I'm assuming they'll change it back at some point in the future as they move into Full Self Driving.
(P)1462554-00-H Rev 01 ---- TLA,CAR.COMP,NA,HW3.0,M3 ---- Version 3.0 of the Model 3 ComputerI will try to check my part # today and report back.
That is in fact, what Tesla did. Pre-28.2, HW3 used H.265 encoding. With 28.2 encoding is now h.264. the only way you can now tell is by grabbing the part number specifically. See FSD computer HW3 or HW2.5 tracking sheet for more info.I took delivery of my SR+ on 7/30. Build date 7/2019. Same exact firmware history as you. Factory installed firmware was 2019.15.105 46b3032. Received update to 2019.28.2 320fba0 a few days ago. No FSD.
To my surprise, my video is H264, but I am going to go on a hunch that Tesla made a change with 2019.28.2
I saw a few other threads where owners who took delivery with specs similar to ours checked their actual HW behind the glove box, confirmed HW3 via part number, and have H264 encoding.
I could be wrong...
The rear view camera is jerky and Tesla can’t figure it out, and I’ll never purchase FSD on this car so it’s worthlessWhy?
The rear view camera is jerky and Tesla can’t figure it out
The rear view camera is jerky and Tesla can’t figure it out, and I’ll never purchase FSD on this car so it’s worthless
Dang wtf?
Tesla is trying to figure it out on my car. They have replaced the rear view camera already with an updated part. No change.Can confirm this. In my one week old P3D-, the rear view camera is very jerky. The problem is exacerbated by the fact that sometimes it's as smooth as butter, other times jerky, other times smooth and then it starts to stutter really bad.
The car's sonar saved me a few days ago while backing into my garage. The camera had been working nice and smoothly, then suddenly started lagging behind, then froze for two seconds or so. I didn't realize how far behind real time the camera was until my car beeped at me about the stuff that was now rather close to the rear bumper. Right when the car beeped, the camera updated, and jerked everything in frame much closer to my car.
As of now, it simply isn't reliable enough to safely use for backing the car up.
Received update to 2019.28.2 320fba0 a few days ago.