Welcome to Tesla Motors Club
Discuss Tesla's Model S, Model 3, Model X, Model Y, Cybertruck, Roadster and More.
Register

GLOVEBOX USB FOR CHARGING

This site may earn commission on affiliate links.
Can the glovebox USB A used for the dashcam/sentry also be used for charging.

My intentions is to power my radar detector.
I have a USB to RJ11 that I use to power my radar detector.

So I want to get Jowua 3 Port USB HUB with DashCam Reader.
I put SD card in one slot for the dashcam and use one of the USB A to power my radar detector.

By the way, I normally put my radar detector on the dash - far right by passenger side.
so a power source from the glove box - will have minimal wire length

 
  • Informative
Reactions: fholbert
Can the glovebox USB A used for the dashcam/sentry also be used for charging.

My intentions is to power my radar detector.
I have a USB to RJ11 that I use to power my radar detector.

So I want to get Jowua 3 Port USB HUB with DashCam Reader.
I put SD card in one slot for the dashcam and use one of the USB A to power my radar detector.

By the way, I normally put my radar detector on the dash - far right by passenger side.
so a power source from the glove box - will have minimal wire length

It's 5V, and don't expect much power.
 
Upvote 0
No problem with shopping links as long as you are not a vendor who needs to get registered properly.
The Radar Detector adpator is this:
https://www.amazon.com/dp/B0BLTSS9C2?ref=ppx_yo2ov_dt_b_product_details&th=1

and I would buy the USB hub from Jowua
3 Port USB HUB with DashCam Reader

So I would insert my SD card and power my radar detector at the same time.

Normally , my radar will be near the A pillar on the dash of the passenger side.
I normally hold the radar in place with gripeez
 
Upvote 0