-
Want to remove ads? Register an account and login to see fewer ads, and become a Supporting Member to remove almost all ads.
Installing escort max ci 360! :)
- Thread starter 2rare2die
- Start date
-
- Tags
- escort radar Model S
routed wires down the hatch pillar down to the bottom grommet
wire hanging out Is the wire I used to fish through
NOW!!!! BE WARNED!!!!!!!!!! going through this grommet was NOT a good time. was NOT easy. IF you do this, be very very very careful. take your time! it took a bit to get through this because it was very tight. felt like I wasn't going to get it through. but BARLEY made it. had to unplug those connectors for more room. I did this on both sides
all done with that PHEEEWWW!!!!
routed the wires behind so it stays clear from the air bag and the seat belt
wire hanging out Is the wire I used to fish through
NOW!!!! BE WARNED!!!!!!!!!! going through this grommet was NOT a good time. was NOT easy. IF you do this, be very very very careful. take your time! it took a bit to get through this because it was very tight. felt like I wasn't going to get it through. but BARLEY made it. had to unplug those connectors for more room. I did this on both sides
all done with that PHEEEWWW!!!!
routed the wires behind so it stays clear from the air bag and the seat belt
Attachments
rear bumper is off. this thing is filled with mud lol.. either the went "MUDDING" or this is where the dirt really likes to build up lol
dilled new hole next to the 10MM bumper support bolt for rear receiver wire, grommet and sealed
red "scratch" line) ran wire behind and out. in the green is were I routed the wire across
dilled new hole next to the 10MM bumper support bolt for rear receiver wire, grommet and sealed
red "scratch" line) ran wire behind and out. in the green is were I routed the wire across
I believe this is the last bit. I don't think I have anymore photos.
this is where I mounted the LED.
mounted display to the windshield. kind of weird picture I took. makes it look kind of crooked. but its straight if your wondering. cause when I looked at it I had to go back to the car and look again lol.
reason why its up there is because you wont have big holes anywhere on the dash to fit flush. visibility is great there as well.
this is where I mounted the LED.
mounted display to the windshield. kind of weird picture I took. makes it look kind of crooked. but its straight if your wondering. cause when I looked at it I had to go back to the car and look again lol.
reason why its up there is because you wont have big holes anywhere on the dash to fit flush. visibility is great there as well.
Similar threads
