"Refreshed" Model S model VIBRATION tracking and information thread!!!

[n2mb_racing]

@wk057 Do you know if the ride height can be lowered in the alignment settings?

 

[sorka]

@wk057 Do you know if the ride height can be lowered in the alignment settings?

It can't. The only way to lower the car without lowering links is to do a ride height calibration with Toolbox 3 and LIE about height of the 4 measurement reference points. So if you want to lower the car by an inch, you have to add an inch to the measured height of each reference location.

 

[n2mb_racing]

It can't. The only way to lower the car without lowering links is to do a ride height calibration with Toolbox 3 and LIE about height of the 4 measurement reference points. So if you want to lower the car by an inch, you have to add an inch to the measured height of each reference location.

That's what I meant. Lie about the height of the reference points and then it should lower the car....

 

[sorka]

That's what I meant. Lie about the height of the reference points and then it should lower the car....

Yup. The only caveat is if Toolbox prevents you from entering a value that is too far above some expected range as a sanity check.