Toolbox 3 Gateway Configuration Edit on Model 3 / Y?

[terranx]

Anyone out there know how to do this? As best as I can tell, the menu the tesla techs use (something to the effect of dashboard -> infotainment -> vehicle configuration change) isn't present in the version of toolbox us mere mortals get access to. However, under actions, PROC_ICE_X_SAFE-SET-VEHICLE-CONFIGS is available. The parameters it accepts are ConfigParams (type List) and Configs Require Ice Reboot (presumably yes/no, true/false, 0/1, etc -- can be left blank though I believe).

From what I can tell digging through the app.f5d3cbaebb2ad903a936.js file, this action is what's invoked when making the gateway config changes the official way. I just can't figure out how to format the input. For example I'm trying to change id 32 to 01, and I've tried sending {32, 01} and many variants (with quotes, different brackets, etc), to no avail. I mostly get an error about not being to cast the input as a List.

Anyone out there know what to do or can help with some hints? I can share any other relevant info

 

[Cheetah]

I'm trying out the service shell in Toolbox 3, however when using gw-diag it says "error: executer: no matching rules found for 'gw-diag'"

Is it only available when locally connecting or am I missing something?

 

[terranx]

typically you can’t get onto service shell without being locally connected. If they added remote shell capability that’s a big change and hard to say what else could have changed.

What is the precise command you’re entering for gw-diag? You’ll get that error if there’s any sort of typo

 

[Cheetah]

typically you can’t get onto service shell without being locally connected. If they added remote shell capability that’s a big change and hard to say what else could have changed.

What is the precise command you’re entering for gw-diag? You’ll get that error if there’s any sort of typo

Yeah the service shell is remotely accessible! I’ve tried some things after I posted that question and I didn’t notice a difference between the remote and local shell.

Anyways, all commands worked fine after I stopped wrapping the arguments in double quotes

 

[PhilippDen]

Does anyone have the ID for the new active suspension of the new performance model 3?
A friend of mine changed the suspension and now the car shows an error message since the active parts are not connected anymore. Maybe there is a software way to tell the car that the active suspension is not in the car anymore.

 

[terranx]

There’s an air suspension config, dunno if they would have repurposed that for the 3’s electronic dampers. Otherwise I’d need to connect to such a car and dig a little to see if there’s any configs that might be the ticket

 

[Illuminati235]

Would be interesting to know if you guys have MCU2 (Intel Atom) or MCU3 (Ryzen) cars. I've seen some doubt that it might be exclusive to MCU3. I personally think the Intel is good enough, even for the V12 UI features that were annoucned today, but you never know.

Tested this yesterday. Tesla Model 3 2019 with Intel Atom and FSD (not active bc I'm in Germany). No Visuals, only an error message that park assistance is unavailable. Had no problem reprogramming it back to 00/Valeo (after re-install).

 

[PhilippDen]

There’s an air suspension config, dunno if they would have repurposed that for the 3’s electronic dampers. Otherwise I’d need to connect to such a car and dig a little to see if there’s any configs that might be the ticket

That’s a good idea! I will be able to read out the config data of a performance Model 3 in a few weeks. Maybe they repurposed it

 

[鱼鱼 木]

Anyone out there know how to do this? As best as I can tell, the menu the tesla techs use (something to the effect of dashboard -> infotainment -> vehicle configuration change) isn't present in the version of toolbox us mere mortals get access to. However, under actions, PROC_ICE_X_SAFE-SET-VEHICLE-CONFIGS is available. The parameters it accepts are ConfigParams (type List) and Configs Require Ice Reboot (presumably yes/no, true/false, 0/1, etc -- can be left blank though I believe).

View attachment 878829

From what I can tell digging through the app.f5d3cbaebb2ad903a936.js file, this action is what's invoked when making the gateway config changes the official way. I just can't figure out how to format the input. For example I'm trying to change id 32 to 01, and I've tried sending {32, 01} and many variants (with quotes, different brackets, etc), to no avail. I mostly get an error about not being to cast the input as a List.

Anyone out there know what to do or can help with some hints? I can share any other relevant info

How to bring up the ambient light control UI of the new version 3 on the old 3 and Y，

 

[鱼鱼 木]

Anyone out there know how to do this? As best as I can tell, the menu the tesla techs use (something to the effect of dashboard -> infotainment -> vehicle configuration change) isn't present in the version of toolbox us mere mortals get access to. However, under actions, PROC_ICE_X_SAFE-SET-VEHICLE-CONFIGS is available. The parameters it accepts are ConfigParams (type List) and Configs Require Ice Reboot (presumably yes/no, true/false, 0/1, etc -- can be left blank though I believe).

View attachment 878829

From what I can tell digging through the app.f5d3cbaebb2ad903a936.js file, this action is what's invoked when making the gateway config changes the official way. I just can't figure out how to format the input. For example I'm trying to change id 32 to 01, and I've tried sending {32, 01} and many variants (with quotes, different brackets, etc), to no avail. I mostly get an error about not being to cast the input as a List.

Anyone out there know what to do or can help with some hints? I can share any other relevant info

It is now known that you can change the color of the caliper, the reality of the front fog lamp, the opening of the foot socket lamp... Can you configure the seat ventilation control UI of the new 3 to the old 3 and y？

 

[鱼鱼 木]

Anyone out there know how to do this? As best as I can tell, the menu the tesla techs use (something to the effect of dashboard -> infotainment -> vehicle configuration change) isn't present in the version of toolbox us mere mortals get access to. However, under actions, PROC_ICE_X_SAFE-SET-VEHICLE-CONFIGS is available. The parameters it accepts are ConfigParams (type List) and Configs Require Ice Reboot (presumably yes/no, true/false, 0/1, etc -- can be left blank though I believe).

View attachment 878829

From what I can tell digging through the app.f5d3cbaebb2ad903a936.js file, this action is what's invoked when making the gateway config changes the official way. I just can't figure out how to format the input. For example I'm trying to change id 32 to 01, and I've tried sending {32, 01} and many variants (with quotes, different brackets, etc), to no avail. I mostly get an error about not being to cast the input as a List.

Anyone out there know what to do or can help with some hints? I can share any other relevant info

How to bring up the ambient light control UI of the new version 3 on the old 3 and Y？It is now known that you can change the color of the caliper, the reality of the front fog lamp, the opening of the foot socket lamp... Can you configure the seat ventilation control UI of the new 3 to the old 3 and y ？

 

[terranx]

The configuration options exist (I don’t remember the IDs off hand but they’re somewhere in this thread I think), but appeared to be secured when I tried changing them

 

[鱼鱼 木]

GRB does not appear to be part of the vehicle's safety configuration

 

[鱼鱼 木]

Recently there was a mobile technician he was using a version of toolbox which we dont have access to. He was able to change the gateway config and set everything he wan

Recently there was a mobile technician he was using a version of toolbox which we dont have access to. He was able to change the gateway config and set everything he wants.

It is now known that you can change the color of the caliper, the reality of the front fog lamp, the opening of the foot socket lamp... Can you configure the seat ventilation control UI of the new 3 to the old 3 and y？How to bring up the ambient light control UI of the new version 3 on the old 3 and Y ？

 

[Merchant Zhang]

About auxParkLamps id=43, Anyone know how to enable the fog led pipe light when light turn to Parking light or Low beam headlights? In China, only when we turn on the front fog. The fog light and the fog pipe led light will on. Also I really don't know what is the side markers. But I do see the car in NA when turn to parking and Low beam the fog pipe light will turn on without the fog light. The config from my car is 3. But I do can turn on the front fog.

"[{"Value":0,"CodeKey":"NA_BASE","Description":"Side markers only"},{"Value":1,"CodeKey":"NA_PREMIUM","Description":"Side markers, light pipe as auxiliary park lamps"},{"Value":2,"CodeKey":"EU","Description":"Light pipe as fog light guide, no side markers"},{"Value":3,"CodeKey":"NONE","Description":"Plastic inserts instead of lights"}]"

 

[WhiteM3P-]

About auxParkLamps id=43, Anyone know how to enable the fog led pipe light when light turn to Parking light or Low beam headlights? In China, only when we turn on the front fog. The fog light and the fog pipe led light will on. Also I really don't know what is the side markers. But I do see the car in NA when turn to parking and Low beam the fog pipe light will turn on without the fog light. The config from my car is 3. But I do can turn on the front fog.

"[{"Value":0,"CodeKey":"NA_BASE","Description":"Side markers only"},{"Value":1,"CodeKey":"NA_PREMIUM","Description":"Side markers, light pipe as auxiliary park lamps"},{"Value":2,"CodeKey":"EU","Description":"Light pipe as fog light guide, no side markers"},{"Value":3,"CodeKey":"NONE","Description":"Plastic inserts instead of lights"}]"

Tied to region. So it doesn't do anything at the moment. Mine is set to EU and no behavioral change.

 

[Merchant Zhang]

Does this guide correct for now? When parking light half of fog light on.

 

[WhiteM3P-]

Does this guide correct for now? When parking light half of fog light on.

My US car has orange side runner and light pipe that run with parking lights.

 

[Merchant Zhang]

Sound like I can set it to EU and have a try.

 

[Merchant Zhang]

So sad I can’t make the fog light run as NA car. I had try 1 and 2 value of auxParklamps on a CN car. Still don’t know how to make the fog pipe light on when parking light turn on.

 

[WhiteM3P-]

So sad I can’t make the fog light run as NA car. I had try 1 and 2 value of auxParklamps on a CN car. Still don’t know how to make the fog pipe light on when parking light turn on.

Yeah it's region locked. Just like 2020 and older model 3 taillights can't be set to global