Search results

I have bought from rpmtesla.com with positive experience. If you are local to Southern California, they offer most of their products installed on-site.

I'm in same boat. I just came back from service center and they can only fix it by replacing the whole arm assembly!! Amazing they cannot replace plastic clips that seems to be breaking after some time. Would love to gain access to the .stl file OR pay for the services or pay for the file...

This is no longer available.

Need this gone. Lowering price to FREE if picked up.

Brand new Powerwall 2 Gateway ONLY for sale. I received it with my 2nd Signature battery but I already had a Gateway installed. It comes with the wireless CT hardware and all cabling and manual details. Southern California pickup only. Normally sells for $1800. Willing to let it go for $500.

In its original bag but not box. Was opened, put on car once for 2 days and decided I don't need it since I am now parking in the garage. Not dirty or any defects. It has sat in my garage in its bag for the last 7 months. Available for $225 in Southern California. Would rather not bother...

I have a founders power wall set that I bought on this site and I still have not been able to get anyone to install it for me! No electrician will touch it and a couple of recommended certified Tesla installers want 4-5k to install the unit before any added parts.

Just the simple fact Gen 2 has a 24' cable over the Gen 3 18' cable is a huge plus. The Gen 2 also offers 80 amps over the 48 amps on the Gen 3. I know the newer cars only need the 48 amps but I am actually curious if the Cyber Truck wont need / want higher amps. I have a Gen 2 Signature...

I ended up getting my Blaster through a huge run around last year about 1 week after they stopped offering the solution. From what I have read and found out, is that Tels is not using a different model inverter and setup but not sure if anything has changed on the blaster front. And from your...

I just sent you a PM. In a nutshell I like the system even though the ROI is not ideal.

I had one installed and if you want to preserve your warranty you need to have a certified Tesla installer handle the installation which you will need to get city permits also. The costs all depends on what needs to be done. If you need an additional sub panel there is more cost associated to...

PM sent.

Would you sell just the powerwall by itself?

Is this still avail ?

Never mind. At the proposed $6500 and my pricing from Tesla as a purchase with my solar system which I am in the middle of doing and currently at the permit stage, the cost difference is only $1473.00 after I get my fed credit and I would still have to pay someone or Tesla (if they even offer...

I am interested. Checking the installation cost from Tesla right now. Where are you located at ?

Ahh. Bummer. So its either one or the other while the connection is either Tesla-Z or Ethernet and it sounds like either a physically connect / disconnect would have to be done or some sort of automated device put in place to cycle the connection from what I am reading from earlier..... I...

this is some great information. I am still in the Permit stages for my Telsa solar installation. I am confused about one item after reading all of this info. If I make the requests for the map and layout info and access to solar edge app access, why do I still need to physically attach an...

Sent you a message.

Did you ever finish this project ? I was looking for a matte finish CF T for front and back for my 3.

Why are you asking for our Tesla account credentials in order to give out a quote ? I just sent an email making that request but curious why a Tesla account was being requested as an option for the quote ?

Did anyone contact you back to confirm your appointment and the fact they will perform the install ?

So with the video and blow out details, If you really wanted to save on your total costs, you could run the car with no rotation and replace the front tires when closer to the minimal thread depth and replace the back ones more often for best traction and safety. instead of rotating them to...

After reading my own post I seem to not have explained my thoughts as well as I should have. My point was at the 25% mark with rotation you are driving a car that has 4 tires with lower thread which means less traction tires compared to no rotation that at all time you would have at least 2...

I understand and I would agree but again reading and thinking it through..... You are either driving on all 4 tires that at the last 25% mark are getting closer to their wear mark (one set a little more than the other set) OR you will always have 2 newer tires on the car (either front or back)...

I am from the camp of rotation, not because of what everyone is saying, but from the old age practice... After reading all of this, I am curious. I am in the same exact boat as you with my current wear but with 19's. But I am thinking, if I had all 4 tires of the same exact brand and size...

To satisfy both camps. I think it might make sense to rotate the right side tires but don’t rotate the left side ones. So both sides of the discussion would be covered.

I am also on 12.1.2 still in CA. I checked on Teslafi and not a lot have received it in CA and what is still remaining on Teslafi 940ish approx 500 are all from California and when I checked earlier this morning there were over 1200 remaining and there were still approx 500 from California. So...

Sorry for the delay on getting this out. Tools I used to remove the tape: All purchased from Homedepot...

Thank you.

What firmware were you coming form and any new release notes of changes ?

where did these come from ? Who makes them ?

Sure. I will post the info on the material used tomorrow.

So do you still have the oem Installed?

I have a 1 week old OEM Factory Model 3 Carbon Fiber Spoiler (latest model) that was pulled off of a friends wife's car because she didn't like the look. Its backing tape is so fresh that it barely has been damaged. BUT it still needs to be priorly cleaned and removed and new tape to be...

I bought a OEM pull a week ago and I removed it's old tape 100% and properly cleaned it up. Then purchased high grade 3M tape 1/2" and 1/4" and placed the 1/2" on the bottom ledge and the 1/4" on the top against the lip that the old tape line was ending prior to the flat top surface. Then...

I would agree if you are on a trip. :-) Since I am charging at the house at the end of the day it becomes a none issue other than the extra electricity being used. The electric plan I am on, it's costs are low enough at night that I can still justify my spirited driving.

I am currently at 358wh/mi. I think my biggest issue is the SPEED I drive. I am not a slow driver and I have seen that being my biggest issue. The second is where I live is very hilly and for the last approx 15 min of my drive home tends to be doing a gradual uphill climb on the freeway and...

I have come to a conclusion that the only time I am going to baby my drive is if I am needing to stretch my avail range on long trips. Since I plug in every night I am not as worried on my avail range on my RWD Long range during my everyday drive. I am averaging approx 200-210 miles at 90% and...

outside or inside cover ?

And what material are you using ? 7075T6 or 6061T6 or something else ?

Do you have them in 15 / 15 instead of 15 / 20 ?

I personally used the Mothers CMX. I am very happy with the results and it was very easy to put on and wipe off compared to the other Pro ceramic coating products I have read about...

They should be available for sale within the next 1-2 weeks.

It was already installed and the edge seemed fine. This was the prototype model . I will have more info next week on Matte version.

These are images of the first prototype gloss OEM style CF spoiler from RPMTesla. Car is dirty and so is the spoiler (sorry). Next week I will have another image of the Matte finish OEM style CF spoiler. That will be installed on my Midnight Silver Model 3. I can say these look exactly like...

Sent you message

You selling or wanting one? If selling how much?

What about noise ? Did you notice any difference between the stock 19 tires that Telsa had to these ? You said these have better comfort ? In what way ? Thanks for your input.

lol. Until you get pulled over! :-O