Aftermarket Wheels on Model 3

[SignatureSales]

Well then, I stand corrected. haha

I was under the impression that it was a combination of width and offset, with the width factoring in the most. I was mostly going by my wheel manufacturer's website because they categorized "concave" wheels based on width and not offsets.

View attachment 431207

I agree that most of the time which the lower offset with wider width will equal to deeper concave, but take a look of our fitment page, we don't categorized concave wheels "fully" based on width and offset but actually wheel that's been built. I personally think it is not appropriate for manufacturer to provide the wheel concavity without the specific spec.

Shelby GT350's fitment F19x11 ET25 R 19x11.5 ET55 has less concavity than 19x10 ET40 for the 987 Boxter. Even the Ferrari F12 got Mild face for the 12.5J crazy wide wheel. The reason is the GT350 and the F12 run a much bigger brake plus the distance between hub to fender are limited.

At the end, there isn't right or wrong since concavity is subjective, but as we build or advertise our wheel, we compare the similar size wheel side by side to determine the amount of concave we think it belongs to whether is mild, medium or deep etc...

.

 

[mpbruin108]

I waited about half a year for these once I first heard of this design being created. So glad I did. I think it looks great. I wish I was braver to go matte bronze but this looks even better and its subtle. I'm the first to rock this style from VMR.

I had my fun with the 18s and I didnt want to go 20s on my Performance 3D. So I went 19x8.5 and 19x9.5 in rear. Pretty flush in back with et35 all around. Also dropped on unplugged springs. Me likey!!

 

[Burrito]

They look almost identical to the vorsteiner 107s. Are they lighter?

 

[jkoya]

I had my fun with the 18s and I didnt want to go 20s on my Performance 3D. So I went 19x8.5 and 19x9.5 in rear. Pretty flush in back with et35 all around. Also dropped on unplugged springs. Me likey!!

Nice !! What size tires are you using ?

 

[AKMA]

View attachment 431331 View attachment 431332 View attachment 431333 View attachment 431334 I waited about half a year for these once I first heard of this design being created. So glad I did. I think it looks great. I wish I was braver to go matte bronze but this looks even better and its subtle. I'm the first to rock this style from VMR.

I had my fun with the 18s and I didnt want to go 20s on my Performance 3D. So I went 19x8.5 and 19x9.5 in rear. Pretty flush in back with et35 all around. Also dropped on unplugged springs. Me likey!!

Which UP springs are running? Look's good!

 

[DrDrew]

More pics. Brixton RF7. Photos by Mike @thecleantesla

 

[Lucky13]

New track shoes are in!

Speedwell RS-1 19x9.5 +35 with 265/35 RE71.
Not hubcentric, so I picked up a set of 72.6-64.1.
Total weight with the tires/TPMS/metal valvestems and balance weights = ~47.5lbs (old digital bathroom scale)

View attachment 429344
View attachment 429343 View attachment 429345

They look great. How to see you at tc5

 

[Watts 4 Me]

View attachment 431157

@P-Lo801 How did you do that with your license plate?

 

[SD_Engnr]

They look great. How to see you at tc5

Thanks! I plan on being there.

 

[P-Lo801]

@P-Lo801 How did you do that with your license plate?

licenseplatewrap.com

 

[AKMA]

@RichardDo @DNorris89 @BYE FSL sorry to keep y’all waiting here’s


Dual Motor, 18x9.5 +38 on 265/40, Unplugged Super Low springs

 

[TMThree]

Rims are 23 lbs each. 19" with Yokohama AVID GT tires.

 

[TSportline]

Long Range wearing TSS Flow Forged 19x8.5+35 in Space Grey with Factory Continental ProContact RX Tires 235/40-19.

Executive Gloss Carbon Fiber Trunk Wing

 

[EV-Tech Exp]

“Overnight parts from japan”
View attachment 429470

Love this wheel design! Got a side profile shot? What wheel and tyres size?

 

[AuxTown]

Hi, was also considering these wheels, in gunmetal or black. Where did you pick them up from? 19 or 20”? Thanks

Got them from a local shop here in Ottawa, Goldwing Ottawa Tires: All-Season & Winter Tires In Ottawa - Goldwing Autocare
They do a lot of work on Teslas

 

[T3SLAROD]

@RichardDo @DNorris89 @BYE FSL sorry to keep y’all waiting here’s


Dual Motor, 18x9.5 +38 on 265/40, Unplugged Super Low springs

View attachment 431953

Side pic of those Volks please!

 

[JC1977]

Looking at a 19 x 8.5 set with 245 40 19 tires, 35 & 45 offset are available, which would would you go with?

 

[DNorris89]

@RichardDo @DNorris89 @BYE FSL sorry to keep y’all waiting here’s


Dual Motor, 18x9.5 +38 on 265/40, Unplugged Super Low springs

View attachment 431953

Loving this look! Did you have any issues with the bolt holes being too small on the 18s?

 

[P-Lo801]

Looking at a 19 x 8.5 set with 245 40 19 tires, 35 & 45 offset are available, which would would you go with?

I would go with 35 because it's oem offset for P3, while 45 would push the wheels inward more.

 

[AKMA]

Love this wheel design! Got a side profile shot? What wheel and tyres size?

Thanks much appreciated! Michelin PS4S 265/40/18

Side pic of those Volks please!

Hope this is sufficient

Loving this look! Did you have any issues with the bolt holes being too small on the 18s?

Thank you! and yes, had to bore out to 15mm to allow the studs to pass through.